ZTE ZXHN H118N: review and configuration of the router Dom.ru and Rostelecom

How to enter the modem menu

Login can only be done after connecting the Internet service provider cable to the WAN port (RJ-45) on the back panel of the ZTE ZXHN H118N Rostelecom router. One of the 4 ports of the LAN router (RJ-45) is connected by an Ethernet line to the network card connector of the computer (PC) or laptop used for configuration. You must first set the device to automatically obtain addresses on the Internet Protocol version 4 page.

According to the information on the sticker, you can see that the device’s IP address is 192.168.0.1 and by default its authorization data is used: username is admin, password is admin. The network address is entered into the address bar of the web browser used on the PC, and information about the login and password is necessary to fill in the fields of the window that opens.

The router program requires that the provider's cable be connected to the WAN connector, and the first login page will remind you of this if the necessary condition is violated. If the router detects an Internet connection, the page will look different. It will prompt you to select a time zone and the need to change the factory password with the corresponding information fields.

After completing the safety requirements, you must click on the “Continue” stencil and go to the next page. On it you need to select the proposed setup method: “Start the wizard”, “Configure the device manually”.

How to make the menu complete

The Rostelecom router is configured after selecting manual settings. To enter the menu, you need to enter the user name - admin - and the created individual password. When you click on the “Login” tab, you go to the start page of the router interface with general information about the device. The “Network” item on the left side opens the possibility of selecting the type of WAN connection.

When setting up, the data provided by the provider when concluding an agreement with him is used: the type of Internet connection (PPPoE), the number of the enabled VLAN (fiber optic) and its priority, username and password. The connection you create must be "Always On". The entered data is saved when you execute the "Edit" command at the bottom of the page.

To use the TV viewing function, you need to re-open the list of possible WAN connections and select IPTV from it. In the connection type line you need to use “Bridge” and then execute the “Create” command. After this, you need to go to the “Port binding” item in the WAN section of the main menu.

It performs software assignment of connectors LAN1-LAN4. For PPPoE, ports LAN1-LAN3 are selected by default. Computers will be connected to them. For IPTV you need to assign LAN4. It will come with a set-top box that will use it via an Ethernet cable line. After checking the selected boxes, click the “Save settings and confirm” button.

Blog about modems, routers and gpon ont terminals.

A little over a year ago, I reviewed the ZTE H108N universal router, which could work on both FTTB and ADSL lines. As time has shown, it turned out to be a quite worthy device: compact, fast (it held up to 100 megabits perfectly), with a good wireless network coverage area and quite reliable (minimal percentage of defects). About six months later, for some reason, the developers removed the device’s versatility, limiting its capabilities to a regular ADSL modem in the new firmware. Accordingly, all the poor souls who used it on FTTB and updated the software to this version on their own account had to look for the previous one and rollback. And after some time, another model of the Rostelecom branded router appeared - ZTE ZXHN H118N - this is a purely Ethernet router. That is, now the “area of ​​responsibility” is clearly divided - 108th is used for ADSL, and 118th is used for Ethernet.

Externally, these two devices differ only in the WAN port and the color of the RTK logo. Otherwise they are completely identical.

As soon as it appears in the connector entering the apartment, click the “Continue” button. If the router sees the connected cable, the picture will change:

At this stage, you need to change the default password for authorization on the device from “admin” to any other, preferably more complex one.

And then you need to choose the method by which you will configure the device. In most cases, it is better and faster to do this with the help of a special wizard. Let's take a look at this method.

How to set up ZTE H118N for Internet and digital TV

First step . select your Rostelecom branch and the service you have connected to:

I will consider the most common case - the Internet and interactive television IPTV. Click the “Continue” button. Second step. Here you need to specify your login and password for authorization via the PPPoE protocol. They are usually issued to the user upon concluding a contract at the sales office of the telecom operator.

If your branch uses the “Dynamic IP” connection type, then this stage simply will not happen. Third step. At this stage, you need to check the box for the LAN port in which the Set-Top-Box TV set-top box will be connected.

If in your branch IPTV multicast is delivered to the subscriber’s equipment in tagged form, then you must also indicate the virtual network identifier in the “VLAN Number” field. In this case, the VLAN ID used must be clarified with technical support. Fourth step. Setting up WiFi on ZTE H118N:

In the “Wireless network name” field, enter the so-called SSID - that is, the name of your Wi-Fi network, which will be displayed when searching on connected devices. In the “Wireless Network Password” field, you need to enter the WiFi password, which you must enter to connect. Click on the “Continue” button.

At the last stage, we check the entered data again and click on the “Save settings” button. The Rostelecom H118N router has been successfully configured. We check the operation of services.

Did it help? Recommend to your friends!

Preparatory actions

Let's start with an analysis of the preparatory steps, which should be paid attention to by those users who have not even unpacked the router yet. First, select the place where you want to place the device itself. Make sure that there are no problems with laying the cable from the provider, and that the Wi-Fi coverage area covers all the required points. To do this, it will be enough to avoid thick walls and electrical appliances operating nearby, the radiation of which can affect the quality of the signal. This applies, for example, to a microwave or baby monitor. After this, carry out the direct connection process, which you can read about in more detail below.

Read more: Connecting a router to a computer

The most popular protocol used by Rostelecom is called PPPoE. The principle of its operation is that the user is given unique data for authorization, he enters them in the Internet center and after that the packages are automatically received. In this case, the DNS and IP address are configured automatically, so it is important to ensure that the standard operating system parameters responsible for receiving the same data do not conflict with the router itself. This is implemented by switching the parameter to automatic mode, which is done in just a few clicks.

Login to the web interface

The next step is to log into the web interface. This authorization is performed under standard credentials, which can be determined by various methods. It is in the Internet center that all further manipulations will be carried out, so you must log in to it. Read about how this operation is performed for routers from Rostelecom in the material below.

After going to the web interface, a small instruction will be displayed on the screen that you should follow. Let's deal with this in order.

1. At the first stage, set a new password to access the web interface. You can specify exactly the same key that was used for authorization just now. After this, click on the “OK” button.
2. Next, a form for setting up wireless access points will be displayed on the screen. If the router can operate on two different frequencies, it will be possible to activate both SSIDs. If desired, any of them can be disabled. Now you are required to change the names of the access points and set passwords for them. You can skip this step and return to it later during quick or manual setup.
3. You will be notified that the configuration has been completed successfully.
4. Log in to the web interface using your new credentials.
5. As you can see, a network map appears on the screen. This means that you can proceed to selecting the configuration mode.

A few words about the manufacturer

The ZXHN H118N router is produced by the Chinese company ZTE, well-known in Russia. The domestic buyer may not even know that they belong to this brand, since providers, when purchasing devices for rent to the end user, stick on their logos. For example, “Dom.ru” icons are displayed both on the box and on the body of the router. But, undoubtedly, you need to know at least basic information about the manufacturer.

ZTE was founded in 1985. Engaged in the production of various types of communication devices (phones, tablets, modems, routers, etc.). The controlling stake is owned not by a private individual, but by the state. The products of this brand, in particular, routers, occupy leading positions in the budget segment. According to experts and users, they have the optimal balance of price and quality.

FTTx from Rostelecom

FTTx is a modern Internet technology. Rostelecom is implementing it in major Russian cities. The connection is made via fiber optic. The installation of FTTX Rostelecom routers is usually carried out by company representatives. The FFTx line provides fairly high throughput. Therefore, subscribers can access the Internet at their dacha in the Moscow region using MTS 4g at speeds of over 1 Gbit/sec. You need to be very careful when choosing a router for this technology. Not every device supports FTTx. If the optical cable will be routed directly to the subscriber’s apartment, a special modem should be installed. After laying the cable, Rostelecom specialists configure the FTTx router themselves. Fiber optic modems are quite expensive, so it is advisable to rent such equipment.

Packaging and equipment

As mentioned above, the ZXHN H118N model is distributed in Russia only by providers. Depending on which ones, the design of the box will change. Let's look at the packaging design of the router offered by Dom.ru. It is decorated in yellow and red colors. There is an image of the device on the front panel. The provider's logo is printed in the upper left corner, and the Wi-Fi icon is printed on the opposite side. Between these designations is information about the device: type – wireless router, and model name – ZXHN H118N Wireless N300. At the bottom of the box there is a “Brand of the Year 2011” badge. The back panel contains information about warranty, features, system requirements, standards and equipment. As for the latter, in addition to the device, the box also contains an Internet cable, a power supply, documentation, and a special wall mount.

Connecting a zte zxhn h108n modem

To connect the Ukrtelecom (Rostelecom) h108n modem:

• — connect the plug of the power supply to the “Power” socket on the back panel of the router, and connect the power supply itself to a 220 V network;
• — connect the splitter input labeled “LINE” with a telephone jack using a telephone cable. Connect the telephone to the output of the splitter marked with the word “PHONE” (or “TEL”), and connect its second MODEM (or ADSL) output with another cable to the modem socket marked with the letters DSL.

For the initial setup of the zte zxhn h108n, you also need to connect the router to your computer using the Internet cable supplied with the device. To do this, connect one end of the cable to the network card connector of your PC, and the other end to the LAN2 connector of the zte h108n router.

Press the On/Off button.

Appearance Features

What can definitely be attributed to the advantages of the ZXHN H118N is its design. The manufacturer did their best in this matter. Compared to most faceless models, this router looks impressive. Non-standard design solutions were used for the body. In appearance, it can be compared to a small pillow, which is mounted on a stand. Unlike other devices, this router is installed in a vertical position, which can be considered an advantage, since air access to the ventilation holes always remains open.

The body is made of simple plastic. The color of the device is white. Dimensions: width – 110 mm, height – 50 mm, depth – 125 mm. Weight – 145 g. There are nine indicators on the front panel at the top. There are corresponding symbols next to them. There is a USB connector on the side, but it does not work with the firmware from Dom.ru. On the back panel there are holes for wall mounting, just below them there are control buttons and ports, which we will look at later. Here you can also see a lattice opening for ventilation.

Now let's look under the bottom of the ZXHN H118N stand. Password, MAC and IP addresses, firmware version, country of origin and other information are listed here. It is recommended to pay attention to these stickers, since some of the items listed will be needed to set up the device. Also, it is in the stand that there are hidden bolts that hold the case together.

Device characteristics and features

In the domestic market, remote access points from ZTE are in great demand, due to the following features of the devices:

• all devices are high-speed, support 3G and 4G anywhere in the world;
• the devices are lightweight, compact, and therefore transportable;
• ability to connect to many operating systems: iOS, Android, Linux, MAC OS, Windows XP, Vista, 7, 8 and 10;
• the presence of a connector for an external antenna, despite the fact that the devices are equipped with a powerful internal antenna.

The cases have slots for a microSD memory card and a SIM card. Externally, the devices have a fairly laconic design, characterized by reliability and practicality. The case has a matte surface, so the compact router does not slip in your hands. The average weight is only 35 grams, the dimensions are very compact - 93.8 * 28.6 * 13.5 mm. The protective cap is additionally equipped with a cord on which the modem can be suspended.

Description of connectors

Important elements of any router, and the ZXHN H118N model is no exception, are ports. The first is WAN. This connector is used to connect the Internet cable from your provider. The device is also equipped with LAN communication ports. Through them, a local connection is created. An interface cord is used for these purposes. This model has a USB connector. Through it you can connect not only devices such as a laptop or PC, but also modems. And the last socket, round in shape, is intended for the power supply. It is designated as PWR.

Now let's look at the purpose of the buttons located on the control panel. There are four of them in total.

• ON/OFF – used to turn on the device; when pressed again, the router turns off.
• Wi-Fi – activate/deactivate the function.
• Reset – return the router software to factory settings. To press a hidden button, you must use, for example, a paperclip. To reboot, you will need to hold it pressed for three seconds. As soon as the indicators turn off and start to turn on again, the button is released.
• WPS – the switch is used to activate/deactivate the option.

ZXHN H118N: setting

In order to set up the device and gain access to the World Wide Web, you will need to do some simple manipulations:

• First step. Open a browser on your PC. Enter the IP address. It is indicated on the router case. After which a window should appear with the text “Pre-flight preparations in progress!” If the connection was correct, then after a few minutes this message will be replaced by another with the approximate content “Your router is being configured.”
• Second step. User authorization is carried out in the portal at ya.ru. Here you will need to indicate the data provided by the provider in the contract, for example, number, city, login. It is also possible to change the name and password of the wireless network created in the menu of the ZXHN H118N router. Wi-Fi can be configured without entering user data. In this case, the default settings set by the developers will be used.
• Third step. Save the information and reboot the router. After that, all that remains is to check the Internet signal.

Port forwarding on ZXHN H108N

Port forwarding, or, to put it more simply, redirection, is a technology that allows you to redirect access to equipment located outside the local network. This technology is carried out unnoticed by network clients, so they cannot detect that a re-address is taking place.

To forward ports on the ZXHN H108N router, regardless of the Internet service provider, you need to do the following:

• open the main page of the router web interface;
• go to the Application section and click on the Pot Forwarding menu;
• specify the required redirection parameters.

If the web interface does not have a port forwarding menu - Pot Forwarding, you should update the router firmware version.

In the port forwarding settings window, you must specify a name for the entered condition, and also select the following items:

• control transfer protocol;
• connection type;
• starting IP addresses of the connection;
• range of connection ports (may be the same value);
• IP address of the target device (for example, a computer);
• range of ports on the local network.

Now you need to save the entered data and reboot the router.

Thus, the ZXHN H108N router from the ZTE brand is high-performance equipment that meets all modern requirements and supports all the necessary standards for connecting to the Internet of any type (ADSL, Ethernet, 3G modem). By purchasing this model, the buyer can be sure that the router will serve him for a long time and will not have to be replaced soon, since the router supports IPv6 technology, which allows you to easily switch to using the new network standard.

Share with friends on social networks:

Source

Firmware ZXHN H118N - an easy way

Those users who need to return the device to factory firmware will need to do the following:

1. Download the Patched__ZXHN H118NV2.0.1d_E04_OV.zip file to your PC and unpack it.
2. Enter the router IP in the address bar. In the window that opens, click on any symbol, after which a menu should open.
3. Find the Management item. In it, go to the Firmware Upgrade tab.
4. Flash the ZXHN H118N firmware using the file DOMRU__ZXHN+H118NV2.0.1d_E04_OV.img. After this, you will only be able to log into the web interface via TELNET.
5. Press the Reset key for a few seconds.
6. Log in to the router menu using the standard login and password (admin).
7. Flash the system with the file ZXHN+H118NV2.0.1d_E04_OV.img. As soon as the device reboots, repeat steps 5 and 6.

Setting up Wi-Fi on the ZTE H118N Ethernet router

Router manufacturer ZTE provides its products with a configured Wi-Fi wireless connection. Information about the network name and access password can be found on the label on the router case. But the connection setup can be done manually. To do this, in the VLAN (Wireless Network) section of the menu, select “Setting up Wi-Fi networks”.

On its page you can change the factory values ​​to your own. After selecting the “Security” item, you can change the authentication type and encryption algorithm. Finally, click the save button (“Apply”).

Features of settings for different providers

Setting up ZTE routers differs slightly depending not only on the device model, but also on the service provider.

Among domestic providers, users most often choose the services of Rostelecom, Beeline and MGTS.

In addition to the fact that these operators have maximum coverage of the country, you can find a wide range of tariffs in their list of services.

When setting up a router to work with the Rostelecom network, you need to not only enable Wi-Fi (according to the standard method), but also perform the following steps:

For the correct operation of the ZTE router, which must work in the MGTS or Beeline network, the same steps are performed as for standard connection setup.

That is, entering a password and login, activating Wi-Fi and setting the parameters of Multi-SSID sections. At the same time, routers of this brand are no longer used for ADSL connections.

MANUAL CONFIGURATION OF THE ROUTER

To set up an Internet connection, select: Internet -> WAN

extraneous IPoE DHCP / IPoE Static

Open: PPPoE indicate the PPPoE username and password for the connection, click Confirm (as in the screenshot)

Setting up IPTV . Click “ Create a new element ”

Connection name: IPTV

Type: Bridge Connection

VLAN: Disable

Setting up port bindings for Interactive TV

Select: Port binding -> IPTV

We check the boxes on the ports where the STB set-top box will work.

Allow IGMP traffic. Select Multicast -> IGMP

The router is ready to go.

SETUP WIZARD

Select “Setup Wizard” on the start page of the router.

Set the values ​​as in the screenshot

Enter PPPoE username and password

IPTV service

If you need to change WiFi settings, specify the new network name and password.

Summary information will open

We save the settings, the router takes 120 seconds to save, after which the router is ready for use

If you need more detailed settings or want to configure VoIP , then you need to log into the ZTE ZXHN H298A under superadmin :

Login: superadmin

Password: [email protected] where X is the last 5 digits of the serial number (or [email protected] )

HOME RU

The problem with this device is that it contains firmware from the provider itself. But it is so limited in functionality that even modem routers from Beeline and MTS can easily compete with it. Next I will tell you what can be done with this device. I’ll also tell you about the setup a little lower, although there’s nothing special to configure there.

What to do?

And now the problem I encountered. If in older versions, which have firmware up to 2.1, it is still possible to somehow reflash the device to the original version, then with new ones (2.3 and higher) it is impossible to reflash the router. The provider made sure that their routers could only work on their network.

If you don’t believe me and want to waste your nerves, energy and time, then here is a link to a well-known portal where all possible flashing methods are presented. But I will warn you that by flashing a router version 2.3 or higher, you will most likely turn it into a brick. So you have three options:

• Enjoying a router from this company - in general, for an ordinary user it should be enough to simply change the Wi-Fi name and password (nothing else can be done in the settings).
• Return it (if you just purchased it) - in theory, you can do this within 14 days from the date of purchase (Article 18 of the Consumer Rights Protection Law). If Dom.ru refuses to return the router, then write a statement to Rospotrebnadzor addressed to the General Director.
• If you have had your router for a long time, or you inherited it, then you can do two things. The first is to try to reflash it, if you don’t mind it. In the settings, look at the firmware version, if it has a number up to 2.1, then it’s quite possible to reflash it - go to the forum that I indicated earlier. The second is that you simply throw it away and buy a new one. You can see our selection here.

If you manage to unlock the ZTE Internet center, then write your method in the comments for others. I just changed it to another router.

Connection

Let's get acquainted with the ports and the rear view of the device, and of course, connect it:

• WAN – here we connect the cable from the provider.
• LAN1-4 – local ports. I will be using a laptop to set up, so I will connect here.
• Wi-Fi – turn on and off the Wi-Fi network.
• WPS – a button for quick connection without a password via a wireless network.
• ON/OFF – turns the device on and off.
• PWR input – connect the power supply from the box here.
• Reset – button to reset to factory settings.

There should also be a USB port on the side for connecting external media. You can connect to the network in two ways:

• Via cable like me, connecting to one of the LAN ports.
• For Wi-Fi – the network name (SSID) and password (WPA Key) are located on the bottom of the device on a special piece of paper.

After connecting, enter into the address bar of the browser:

192.168.0.1

Setting up the router

After logging into the ZTE ZXHN H118N Web interface, you will see two welcome pages where you will be notified that the device is being configured independently. After this, you need to go to the ya.ru website and you will be redirected to the registration page, where you will need to enter the client agreement number, login, password, city, new Wi-Fi network name and password. At the very end, click “Submit”.

After this, you will be taken to a menu in which you can’t configure anything special. To change the wireless network settings, click on the “Change settings” link.

A new window will pop up where you can change your login and password - for Dom.ru, authorization in the provider’s network. It is better to set the WiFi network mode and channel to “Auto” mode. To change the Wi-Fi network password, change the line “Wi-Fi network key”.

You can also update the firmware by clicking on the link to the left - this can be done manually. By the way, this is exactly how flashing is done, but only on older versions. On the new ones, the provider removed all features.

Configuring Rostelecom parameters for ZTE brand routers

ZTE is one of the largest companies in the global electronics market. In addition to the manufacturer’s smartphones, which have recently gained enormous popularity, which have a lower cost than similar products from the LG and Samsung brands, but at the same time are not inferior to them in terms of characteristics and quality, the company also takes a strong position in the field of network equipment.

ZTE provides its customers with a wide range of devices to create a home or corporate network. For users who need the Internet outside the city, where it is not possible to create a wired connection, the manufacturer offers ZTE MF 190 modems, distributed both with native (factory firmware) and with an already built-in modification from Rostelecom.

Such USB modems can be connected directly to a computer or using routers that support the appropriate connector and technology.

Attention! There is no possibility to reflash ZTE MF 190 modems from Rostelecom or other operators using official methods. For such tasks, the Dc-Unlocker program is usually used.

ZTE also has routers in its line of network equipment, for example, the H108N, which is adopted by users as a Rostelecom Ethernet modem for setting up high-speed home and work networks.

Preparing to set up equipment

Before setting up ZTE routers under Rostelecom, for example, model E5501, you need to check the equipment package, which contains:

• power supply (12V converter);
• at least one Ethernet cable.

Of course, the newly unpacked box from the device will also contain a software disc, a warranty and a lot of literature, but for setting up a ZTE modem under Rostelecom, these components do not play an important role.

Attention! Even if you want to use the Internet only via Wi-Fi, an Ethernet cable is in any case an indispensable component that is needed for the initial setup.

To connect the device, the first thing you need to familiarize yourself with is the ports on the rear panel.

Turning the ZTE E5501 around with the side with the functional connectors, just like on the ZXV10 W300, you can find:

• four LAN ports;
• Ethernet port;
• connector for power cable.

The ZTE H108N model will have one difference from the above modems, namely a connector for an ADSL cable (telephone cable), since this router is designed for Internet via a telephone line. This will not significantly affect the overall sequence of connecting network equipment. First of all, we connect the power supply to the outlet and port on the router, and then insert the Internet cable into the WAN or ADSL port (depending on the modem model, one of these ports will be present). Now we find an RJ45 connector on the computer (standard network input) and connect it using an Ethernet cable to the corresponding port on the router. Since in our case there are four connectors, you can connect the cord to any one.

Attention! If you are setting up a ZTE H108N ADSL router, then in addition to the described sequence, it is also recommended to connect a splitter that filters the Internet and network signals. This will allow you to use two provider services simultaneously.

When all the cords are connected, you can turn on the equipment, which is done using the button on the rear panel.

Now let's move on to the front part of the device. It contains indicators that will help you find out about the status of the options when setting up ZTE ZXV10 W300, H108N or E5501 modems for Rostelecom. For example, data is displayed here:

• which connector is the computer connected to?
• Is Wi-Fi working?
• Is there a connection to the provider and the Internet?

Setting up an Internet connection on ZTE ZXV10 W300, ZTE H108N, ZTE E5501

When the connection part is completed, you can move on to setting up modems for Rostelecom, which we will do using the ZTE ZXV10 W300 as an example. We go from a computer connected directly to the modem to the browser and enter the router’s IP in the address bar. You can find it in the equipment passport. In our case it will be 192.168.1.1. Now enter the standard login and password, which are also indicated in the instructions for the modem (admin/admin).

After this, you will be redirected to the device software control panel. In the Network tab, select the WAN parameters and configure the PPPoE connection according to the data issued by the provider. They can be found in the contract or on a special Rostelecom card.

Since the equipment supports Wi-Fi parameters and such a modem is usually purchased with the intention of connecting wireless devices to the network, you can configure the operation of the module on the Wireless tab. Here we select the network name (SSID), and also create a security key that will prevent unauthorized clients from connecting to your wireless network.

Setting up network equipment from ZTE, depending on its type (portable or stationary), is carried out in several stages. When installing routers for private apartments or small offices, a suitable location is first selected, then the connection is made, and then the connection parameters are entered.

Sources

• https://otarifah.ru/tarify-rostelecom/kak-provoditsya-nastrojka-routera-zte-zxhn-h118n-rostelekom.html
• https://lumpics.ru/zte-router-configuration-for-rostelecom/
• https://FB.ru/article/364656/router-zxhn-hn-harakteristiki-nastroyka
• https://qsetup.ru/%D0%BD%D0%B0%D1%81%D1%82%D1%80%D0%BE%D0%B9%D0%BA%D0%B0-zte-zxhn-h298a -%D1%80%D0%BE%D1%81%D1%82%D0%B5%D0%BB%D0%B5%D0%BA%D0%BE%D0%BC/
• https://WiFiGid.ru/nastrojki-routera-dlya-provajdera/zte-zxhn-h118n
• https://o-rostelecome.ru/oborudovanie/zte/

Creating an Internet connection

ZTE routers for wired and wireless connections are managed using a special interface, which you can connect to by entering an address like 192.168.1.1 in your browser (you can check this value in the router’s data sheet).

If the device is already connected to the PC, after entering these numbers, a setup window appears on the screen where you need to:

• Enter the user login and password. By default, the word admin is entered instead of each of them (if desired, they can be replaced with any others);
• After filling out the fields, click on Login;
• In the window that opens, select the Network section;
• Open the WLAN tab one by one (sometimes you can select it immediately from the list, without going to the Network tab), and then Basic;
• Select the WirelessRFMode column;
• Change status from Disabled to Enabled;
• Click the Submit button to enable wireless data distribution.

Important: Most often, when connecting by cable, the network is detected automatically. If this does not happen, you may have to update or install the network card drivers. And then set up a new connection.

Now that Wi-Fi is turned on, you can set up the connection itself.

In the WAN Connection menu, PVC0 is selected in the Connection Name line, and Route is set in the Type line.

After this, you need to choose to enter the connection name and password (for a PPPoE connection), which will be used to log into the network.

The ADSL network is configured in approximately the same way, although the transition is to a different tab.

Rice. 7. Router connection process.

If the connection is made using a 3G/4G connection, the setup is carried out through another tab - 3G WAN Connection.

Here you select only the access point name APN (you can find it on the provider’s website or check with the company’s technical support).

The rest of the settings are usually installed automatically.

You should know: Depending on the router model, the names of the tabs may differ. For example, the access point name sometimes needs to be entered on a separate APN Settings tab. At the same time, all user actions will be approximately the same.

Additional sections

In addition to setting up a network connection, the user of a ZTE router has the ability to change other parameters:

• for example, in the Multi-SSID section you can make the network both open and closed;
• the connection name is changed in the SSIDName column;
• the maximum number of simultaneously connected devices is set in the MaximumClients item (most models support up to 32 connections simultaneously);
• in the EnableSSID item, the network can be turned on or off;
• The HideSSID section allows you to hide your wireless network.

Rice. 8. Setting up router protection.

If in the settings menu there is a Security section, where you can select the WPAPassphrase encryption key with a length of 8 to 32 characters.

As well as the Authentication encryption type and the appropriate information transmission security algorithm WPAEncryptionAlgorithm.

When setting a password, you should follow a number of rules.

First of all, choose a combination consisting of at least 8 characters, including both lowercase and uppercase letters, as well as numbers.

In addition, it is not advisable to use user names and dates of birth as passwords.