How to switch data transfer to another SIM? - About equipment

Traffic control

To monitor the situation, you should use special software. This will allow you to see the consumption of megabytes by day, in general, so as not to overspend the limit ahead of time.

The Xiaomi phone has the “Security” application, which includes a monitoring utility:

But don’t despair if you have a Samsung or any other gadget that doesn’t have a built-in feature. Although almost every manufacturer introduces similar features on new models. As a last resort, install the program from Google Play.

How to set up and connect MTS Internet on your phone: manual and automatic setup

How to set up MTS Internet on a phone - such a question rarely worries clients of the mentioned telephone company, since the correct parameters are set automatically. In situations where access to sites suddenly disappears, incorrect operation of the smartphone or malfunctions of the operator are usually to blame. But sometimes telephone company customers have to reconfigure their Internet connection themselves, and in such situations it is not easy to cope without detailed step-by-step instructions.

Access to the Internet - not only via WiFi!

I recently spoke with a friend (he is over 50 years old). We were sitting in a bar, and suddenly he wanted to know the score of his favorite football team in the Champions League. Surprisingly, there was no Wi-Fi access point in the establishment. I suggested looking at the necessary information online via the mobile Internet. To which my interlocutor reacted in surprise, saying, “What kind of game is this?”

I explained it to him, now I’ll tell you too. Since the smartphone uses a SIM card for calls, it also allows you to connect to the Internet through “data transfer” (provided that this is provided for by the current tariff plan of your operator). Just call the hotline number to clarify this information.

If you are provided with a certain amount of traffic for a month or may be charged for daily entry, then it is possible to activate the Internet anywhere, wherever you are. You don't need WiFi for this. You just need to use some device settings.

How to engage reverse gear on a VAZ 2112

Useful content:

Manual Internet settings MTS

Independent, manual installation of the necessary phone parameters will not cause any difficulties for subscribers, since it does not require special knowledge and skills. The main thing is to remember that the process of preparing devices on Android for operation differs from similar actions with iOS and Windos Phone. The main differences relate to opening the desired section of the smartphone and entering the correct values.

iOS (on iPhone, iPad)

If you didn’t succeed in requesting automatic parameters, you should manually connect the MTS Internet to your iPhone. For this you will need:

Go to the “cellular communications” subsection.
Go to the “data transfer” tab.
Select the item that mentions the cellular network.

Then all that remains is to indicate:

APN: internet.mts.ru;
login and password – mts;
LTE and modem mode on iPhone are configured in the same way.

The specified data is enough to visit the sites.

Setting up MTS Internet on Android

Owners of Android devices will have to:

Enter the section mentioning wireless connection.
Check the box next to “mobile internet”.
Click on the “create APN” button.

Then all you have to do is manually enter the correct values:

Name – MTS internet;
APN – internet.mts.ru;
Login and password – MTS.

The remaining lines in Android phones must be left unchanged.

Windows Phone8

The question of how to connect the Internet to MTS will not cause any difficulties for owners of Windows communicators. If subscribers are unable to order the required parameters or enter the above command, they will have to:

Open the “data transfer” section.
Then find the “add access point” item.
The next step is to enter the required values (they are completely the same as what iOS owners have to enter).
The last step is to reboot the communicator.

Other phones

Other smartphones use standard GPRS/EDGE values. They are completely the same as those provided for Android phones, but additionally you need to add a data channel: GPRS. If difficulties arise, you should contact the operators and clarify the exact values for each line or ask them to send the settings. Receiving them will not take time.

Automatic Internet settings MTS

To gain the right to connect to the mobile Internet, you will have to request automatic network settings. They will arrive on the specified SIM card moments later, after which the user will receive (or restore) the ability to load sites and use mobile applications. And in the most difficult situations, when it is not possible to cope with the existing task on your own, you can contact the contact center and use the services of consultants who will perform the necessary actions for the client who contacts them.

Ordering automatic settings

The most convenient way to order Internet settings on MTS is through the company’s website. For this you will need:

Visit the page mts.ru/personal/podderzhka/mobilniy-internet/nastroyki-telefona-modema/avtomaticheskie-nastroyki-telefona.
Indicate in the special field the phone number where you want to send the operating parameters.
Pass the robot test by specifying the required pictures.
Click the “send” button.
Wait a little for the response message to arrive and use the instructions received.

Nothing additional is needed.

What should I do if the settings do not arrive/are not saved?

Sometimes automatic settings do not arrive or are not saved. Such difficulties are rare, but it is impossible to completely exclude their occurrence. The only way out in such a situation is to introduce manual settings. How to set the necessary parameters on Android (and devices with other operating systems) will be discussed later.

An alternative solution would be to go to the nearest MTS branded communication store and get help from an employee working there. But this approach is inconvenient and time-consuming.

Modern tariff plans include a special. It allows you to use the mobile Internet with incorrectly set connection parameters. The only condition that must be met for connection is the presence of an active one. Without it, it is impossible to visit websites and use online services.

If the subscriber does not have the listed options, it is worth connecting them:

in your personal account;
through the “My MTS” mobile application;
using requests *111*18# and *111*2156#.

Data transfer does not work - what to do?

If you read this review carefully, you might have noticed the obvious causes of the malfunction:

There are not enough funds on the balance to provide a gigabyte package under the terms of prepaid communications (or they have gone into the minus - this is possible on some tariffs);
The wrong “point” was selected in the SIM parameters (see instructions above);
Problems on the part of the operator - call technical support and clarify;
Phone software failure - try turning on/off “airplane mode”, restarting the gadget:

Hardware fault - the internal module is damaged. However, voice calls can work correctly. Contact the service center for assistance;
Often the cause of the defect is the SIM card. Remove it, clean the contacts with an eraser, and return it to its place. If it doesn’t help, replace the chip with a new one at the official representative office of the provider.

Now you know data transfer on the phone - what it is, how to enable, disable, configure.

11/22/201810:0017198Victor FelkInformation portal IT Technician

How to enable mobile network data on Android

Mobile data is available on all Android devices that have a SIM card slot. Next, we will tell you how to use it to connect to the network and set up traffic consumption limits.

If only Google apps don't work

Unless Google apps aren't handling mobile data, there's a small chance that it's something to do with Google itself. Try these steps to get your device back up and running.

Clear cache from Google Play Services app. To do this, go to Settings > Apps & notifications > Google Play Services > Storage > Clear cache.

Delete Google Play Store data. Go to Settings > Apps & notifications > Google Play Store > Storage > Reset.

Check for system software updates that may be available.

Go to the Settings app and find the Accounts section. Remove your Google account, then add it again.

How to activate the data service

By calling 06503 you can always quickly get automatic settings for your mobile phone.

Set up your phone or tablet and use mobile Internet and.

From the information on the packaging;
From the information on the label under the battery;
From the documents attached to the device: instructions, receipt, warranty card;
If you have “Android”: Go to Main menu - Settings (or Options) - About device (or About phone, About tablet);
If you only know the phone manufacturer, you can find information about the phone model in our database by selecting the “Entire list” link. For ease of searching, information about most devices is presented with a photo.

Select manufacturer:

B
M
N
WITH
T

Is your device manufacturer not listed?

For the services to work, you must make sure that data transfer is enabled on your device. How to check?

For devices running the iOS operating system

1. On the main screen, type: For iPhone running iOS 7: “Settings” > “Cellular”; For iPad: Settings > Cellular Data; For iPhone and iPad running iOS 6 or earlier: Settings > General > Network. 2. Make sure the Cellular Data switch is turned on (green).

For devices running the Android operating system.

1. On the application screen, select the “Settings” menu; 2. Next, find the section responsible for the “Data Transfer” settings and select it. Attention: in different versions of the operating system this section is called differently: “Data Usage”, “Data Transfer”, “Cellular Network Settings”, etc. 3. Make sure that “Data Transfer” is enabled (there should be a check mark) ); You can also view the “Data Transfer” status in the settings menu in the Notification Center (swipe from the top edge of the device). The icon responsible for “Data Transfer” or “Mobile Data” must be active.

For devices running the Windows Phone operating system

1. On the main screen, swipe left, tap Settings > Data (or Mobile networks); 2. Check that the switch to enable “Data Transfer” is turned on.

Select a service to configure

Mobile Internet

To use MMS, you must first configure your device to work with the mobile Internet. Already set up?

Enter the phone menu, go to “Browser”, enter the address and open any Internet page.

If setup is successful, the web page will be displayed on the screen.

You can view the service connection in your personal account on the website, name . To make sure your number is not blocked due to a zero balance, turn your phone on and off.

How to quickly get automatic Internet settings on your phone?

Mobile Internet on your smartphone should automatically connect after activating the SIM card. If this does not happen, check:

1. Is it connected from an operator? To connect, dial the command *110*181# 2. Settings on your phone Automatic setup of mobile Internet can be ordered by calling 06503. The password for saving settings is 1234. The call is free.

How to set up mobile internet manually on Android?

Android smartphones of different configurations may have different manual configuration paths. You can install and get accurate ones by indicating the device model in the field above.

Usually the path is like this:

1. Go to settings -> “More.” " -> "Mobile network" and check the box in the "Data transfer" -> "Access points" item. Press the New Access Point menu softkey.

2. Enter the following parameters in the appropriate items: — Name: Beeline Internet — APN: internet.beeline.ru — skip the “Proxy” and “Port” items Username: beeline Password: beeline — skip the “Server”, MMSC, “Proxy” items -MMS server", "MMS port", MCC and MNC - Authentication type: PAP - APN type: default - APN protocol: IPv4 - skip the "Enable/Disable" item. Press the menu softkey "Save".

3. Go to the “Settings” -> “More” section. " -> "Mobile network" -> "Access points" and select the created Beeline Internet profile.

How to set up mobile Internet manually on Apple iPhone?

Go to Settings -> “Cellular Data” and select “Cellular Data Network”.

Enter the following parameters in the appropriate fields:

— APN: internet.beeline.ru — Username: beeline — Password: beeline

By visiting the website beeline.ru you consent to the processing of data about your visit to the website beeline.ru (cookie data and other user data), the collection of which is automatically carried out by VimpelCom PJSC (Russian Federation, 127083, Moscow, 8 March St., 10, p. 14, hereinafter referred to as Beeline) under the terms of the Personal Data Processing Policy. The company can also use the specified data for its subsequent processing by Google Analytics, Yandex.Metrica, MyTarget, Monkey, etc. systems, as well as transfer/involve third parties in the processing of data, the list of which is posted here. Processing is carried out for the purpose of operating the website www.beeline.ru and for the purpose of promoting goods, works, services of Beeline and third parties.

PJSC VimpelCom discloses information, the disclosure of which is provided for by the legislation of the Russian Federation on securities, also on the Internet page of Interfax-TsRKI LLC, an information agency accredited by the Central Bank of the Russian Federation for information disclosure. Information is available at the link