How to enable Wi-Fi on an Asus laptop with Windows 7 and 10

On this page you will find information on how to turn on or off mobile Internet on Asus . Also below there will be a link to detailed instructions with pictures on how to switch the Internet to the first or second SIM card on Asus through the settings. If your tariff plan provides you with unlimited Internet or a large package of Internet traffic, then you can use high-speed Internet from your phone, for example, where it is not possible to connect to Wi-Fi. If you have a SIM card or SIM cards with tariffs without Internet or with a small amount of Internet provided, then it is better to disable the mobile Internet on Asus in order to avoid large debits from the account or to use the Internet economically to extend the Internet on the phone. You can also share your mobile Internet with other devices using your smartphone as a Wi-Fi access point, see the link to the article below. We took the information about enabling and disabling mobile Internet from the Asus ZenFone Max Pro; it should also apply to other Asus models and similar Android devices.

And so, to completely disable the mobile Internet on Asus or turn on the Internet, you need to open the menu for quick access to the most useful functions of the phone. To do this, drag down from the top edge of the screen until the menu opens. If in the menu that opens there is no icon with the caption “Mob. Internet", then you need to open the menu completely, to do this, drag the bottom of the menu down or click on “>” as shown in the first screenshot below. If in the full menu that opens there is no “Mob. Internet", then most likely this icon is on the second page. The presence of a second page is indicated by two dots under the menu as shown in the second screenshot below, to get to the second page you need to pull from the right edge to the left or vice versa. Now the menu should definitely have a mobile internet icon by clicking on which we can enable or completely disable mobile internet on the Asus phone. Look at the third screenshot.

I hope the information helped you understand how to disable or enable mobile Internet on Asus . Don’t forget to leave a review and indicate the model of smartphone or tablet to which the information fits or not, so that others will receive useful information from you. If mobile Internet is connected or disconnected on your device in any other way, then please share the information below in the reviews, perhaps it will be the most useful.

  • We'd love it if you added feedback, helpful advice, or additional information.
  • Thank you for your responsiveness, mutual assistance and useful advice on the topic of the article!

Without exception, all owners of mobile phones use them from time to time to access the Internet or chat on ICQ. If you are a beginner and do not yet know how to set up the Internet on a smartphone with the Android

, read on. In modern 3G and 2G networks, devices with the Android operating system that connect to the network for the first time receive Internet access point settings from the operator automatically.

But in some cases this does not happen. This is possible if the phone was imported from abroad, it is “gray”, etc. In general, if information of this kind is in demand, then this article will definitely be useful to someone. So, let's take a closer look at the 3G/GPRS settings for the Android OS, if they were not set automatically. Go to “Settings”, then click on “Wireless networks”, then open the “Mobile network” item. Here, try turning on automatic detection of settings. Perhaps you accidentally knocked them down earlier. To do this, you need to click on the “Telecom Operators” item.

The phone will now start searching for cellular network operators available in your area. If you have found an operator whose services you use, select it from the list provided or simply click “Select automatically” (it is better to use the second option). Settings can also be requested from the operator via SMS to a specific number or by calling their helpline (to find out the number, go to the operator’s website). If all the steps described above did not help and the access point settings are still not determined, then you will have to enter them manually.

To do this, click on “Access points (APN)”, then click on the menu button and select “New access point”. Here enter the access point data, having previously found them out on the operator’s website. In most cases, only fields such as “Name”, “APN (access point)”, “Username”, and “Password” are filled in. - Any name can be spelled. — Username: for Megafon and tele2 is not entered; for BeeLine – beeline, for MTS – mts. - APN (access point): for Megafon - internet, for BeeLine - internet.beeline.ru, for Tele2 - internet.tele2.ru, for MTS - internet.mts.ru. — Password: for tele2 and Megafon is not entered; for BeeLine and MTS – exactly the same as “username” (beeline and mts, respectively). If you don't find your operator in the list, look at the settings on their website.

Those who use BeeLine services may need to select CHAP only authorization. Otherwise, the Internet may simply not connect (this is especially true for devices from foreign markets). Go to settings, select “Mobile network”, then “APN”, then “Beeline internet” and “Authentication type: CHAP”.

By following one of the tips above, you will definitely set up the Internet to


Android OS
device . Once you've entered your settings, make sure you've turned on mobile data. If after this you still cannot connect to the Internet, you should try turning your smartphone off and on.

How to set up mobile Internet on an Android smartphone or tablet.

Setting up the Internet on a phone with the Android operating system will not take much time, if the user has detailed instructions on how to connect the Internet on Android. The guide below provides instructions on the basic methods for completing the task. You can connect to the World Wide Web using mobile Internet, for which the owner of the smartphone will have to regularly pay to the cellular operator for the provision of appropriate services.

If the user does not have money on his balance, then he will find instructions on how to set up the Internet on Android using wireless Wi-Fi access points, which are currently organized in almost all public places and provide free access to the global web, for example, train stations, cafes and restaurants, shopping centers, educational institutions, etc.

Of course, a significant number of people have their own Wi-Fi routers at home, so this guide will be useful for both them and their guests. If you have a computer connected to the World Wide Web, then at the end of this article the user will find instructions on how to set up the Internet on your Android phone via a cable connection to a PC.

Mobile Internet on an Asus phone: how to turn it on or off

On this page you will find information on how to turn on or off mobile Internet on an Asus phone.
Also below there will be a link to detailed instructions with pictures on how to switch the Internet to the first or second SIM card on Asus through the settings. If your tariff plan provides you with unlimited Internet or a large package of Internet traffic, then you can use high-speed Internet from your phone, for example, where it is not possible to connect to Wi-Fi networks. If you have a SIM card or SIM cards with tariffs without Internet or with a small amount of Internet provided, then it is better to disable the mobile Internet on Asus in order to avoid large debits from the account or to use the Internet economically to extend the Internet on the phone. You can also share your mobile Internet with other devices using your smartphone as a Wi-Fi access point, see the link to the article below. We took the information about enabling and disabling mobile Internet from the Asus ZenFone Max Pro; it should also apply to other Asus models and similar Android devices.

To quickly turn on or turn off the Internet on an Asus phone, you need to open the menu for quick access to the most useful functions of the phone. To do this, drag down from the top edge of the screen until the menu opens. If in the menu that opens there is no icon with the caption “Mob. Internet", then you need to open the menu completely, to do this, drag the bottom of the menu down or click on “>” as shown in the first screenshot below. If in the full menu that opens there is no “Mob. Internet", then most likely this icon is on the second page. The presence of a second page is indicated by two dots under the menu as shown in the second screenshot below, to get to the second page you need to pull from the right edge to the left or vice versa. Now the menu should definitely have a mobile internet icon by clicking on which we can enable or completely disable mobile internet on the Asus phone. Look at the third screenshot.

If the method above is not relevant for your phone, then you can follow this link to another article with instructions for enabling or disabling the Internet on Android smartphones and tablets.

I hope the information helped you understand how to enable or disable mobile Internet on Asus. Don’t forget to leave a review and indicate the model of smartphone or tablet to which the information fits or not, so that others will receive useful information from you. If the mobile Internet is turned on or off in another way on your device, then please share the information below in the reviews, perhaps it will be the most useful. Thank you for your responsiveness!

How to enable mobile Internet on an Asus smartphone. Ways to connect the Internet on Android

But in some cases this does not happen. This is possible if the phone was imported from abroad, it is “gray”, etc. In general, if information of this kind is in demand, then this article will definitely be useful to someone. So, let's take a closer look at the 3G/GPRS settings for the Android OS, if they were not set automatically. Go to “Settings”, then click on “Wireless networks”, then open the “Mobile network” item. Here, try turning on automatic detection of settings. Perhaps you accidentally knocked them down earlier. To do this, you need to click on the “Telecom Operators” item.

The phone will now start searching for cellular network operators available in your area. If you have found an operator whose services you use, select it from the list provided or simply click “Select automatically” (it is better to use the second option). Settings can also be requested from the operator via SMS to a specific number or by calling their helpline (to find out the number, go to the operator’s website). If all the steps described above did not help and the access point settings are still not determined, then you will have to enter them manually.

To do this, click on “Access points (APN)”, then click on the menu button and select “New access point”. Here enter the access point data, having previously found them out on the operator’s website. In most cases, only fields such as “Name”, “APN (access point)”, “Username”, and “Password” are filled in. - Any name can be spelled. — Username: for Megafon and tele2 is not entered; for BeeLine – beeline, for MTS – mts. - APN (access point): for Megafon - internet, for BeeLine - internet.beeline.ru, for Tele2 - internet.tele2.ru, for MTS - internet.mts.ru. — Password: for tele2 and Megafon is not entered; for BeeLine and MTS – exactly the same as “username” (beeline and mts, respectively). If you don't find your operator in the list, look at the settings on their website.

General information

Knowing how to connect and configure this device gives the user a lot of options. He will be able not only to use the router, but also to enter all the necessary information. This could be changing personal data, setting up the Internet, or the ability to change settings.

Connection and configuration follow a simple scheme:

  1. The user connects the router and then goes into the settings.
  2. ASUS provides quick setup with special features.
  3. If it is impossible to configure through the wizard, you can contact your WAN provider.
  4. Enter personal data, set a password and change your name if necessary.
  5. A change of the pin code.

To configure your router, you will need additional information. The user needs to know what type of connection the provider uses. If it uses PPTP or L2TP, information about personal data and IP address will be needed. To get all the necessary data, just contact your provider.

Internet speed

One of the main parameters is the possible speed of data reception and transmission, so if the user is just about to purchase a smartphone for subsequent use of the Internet, it is recommended to study its characteristics. First of all, you need to pay special attention to what communication standards the device supports, for example, GPRS, EDGE, 3G, 4G (LTE), LTE-Advance.


You should also know that not every mobile operator provides 4G speed, so it is often not worth overpaying for a feature on your phone that you will never use, or you will only have access to high-speed Internet in rare cases, for example, when traveling to large cities, where This is how free Wi-Fi zones are organized everywhere.


The most commonly used Wi-Fi standard is “802.11n”. However, nowadays more and more routers are being released with support for “802.11ac”, so when planning to purchase such a router, it is advisable to make sure in advance that the smartphone also has the ability to work on this high-speed communication standard.

How to set up an ASUS router for Rostelecom, TTK and Dom.ru

This manual is relevant for ASUS RT-N10, RT-N11P, RT-N12, RT-AC51U, RT-AC52U, RT-N56U and RT-N66AU routers, as well as for all other models running on ASUSWRT software (web interface in dark colors).

In order to set up a connection with the provider, go to the “Internet” section, “Connection” tab. It looks like this:

Most branches of the largest Russian providers Rostelecom, TTK and Dom.ru use the PPPoE protocol. Select it in the “WAN connection type” field:

Be sure to ensure that the “Yes” checkboxes for WAN, NAT and UPnP are checked.

Below, please make sure that the “Yes” checkboxes are checked for the “Obtain a WAN IP address automatically” and “Connect to the DNS server automatically” items:

In the “Account Settings” section, you must specify the Login and password for connecting the ASUS router to the Internet, which were given to you when concluding the agreement.

There is no need to change any further parameters. Click the “Apply” button and check your Internet access.

Dynamic IP (DHCP)

Some branches of providers Rostelecom and TTK use the “Dynamic IP” connection type when the router receives the address from the provider’s DHCP server and no other connections or protocols need to be used. To configure, you need to select the WAN type “Automatic IP”.

Be sure to check that all the points indicated in the figure are ticked. Pay special attention to the fact that DNS server addresses should also be obtained automatically by the device.

How to set up an ASUS router for Beeline

On the Internet, the Beeline provider uses the L2TP protocol for connection:

We leave obtaining an IP address and DNS server in automatic mode. In the account settings, enter the “Username” (usually this is a personal account) and the password that was issued by the operator’s representatives. All that remains is to enter the address of the Beeline VPN server: tp.internet.beeline.ru Click the “Apply” button.

method: Via SIM card of a mobile operator

Immediately after installing the SIM card in the smartphone, it is automatically configured and connected to the global network. The cellular company sends special information to the phone, and the parameters are set independently without the intervention of the gadget owner. Unfortunately, in our world there are always exceptions, and sometimes manual configuration is required. To do this, you need to take the following steps:

Note: all companies providing cellular communication services indicate passwords and logins on their official Internet resources, so if in the above examples there is no data to enter, you can find them out by visiting the operator’s website or calling them by phone.

Connecting the Internet to an Android tablet via a USB cable

If it suddenly happens that your smartphone does not have a WI-FI module, then you can always connect the Internet to Android from your computer via USB.

First you will have to install a special program on your phone - for example, Reverse Tether. After this, it will be possible to connect to the network via a PC. After installing the wire on the device, lower the curtain (swipe the screen from top to bottom and get to the quick access menu). In the window that opens, select the “Internet Connection” item, the “USB Connection” sub-item.

Instead, there may only be a “Connecting” message that needs to be confirmed.

Now on your computer you need to go to the control panel and select “Network and Sharing Center”, where you can change the adapter settings.

Photo about: Network and Sharing Center

To do this, select the name of the network, right-click on it and in “Properties” uncheck the first line in the “Access” tab and confirm. Then go to properties again, check the first box in the same tab and select “Local Area Connection” or simply check the box next to this item. We confirm again.

Photo: LAN connection status

After a couple of minutes, the phone will connect. If an error occurs, the algorithm must be repeated.

Important! It's best to disable Windows Firewall, reboot your phone before connecting, and allow root rights when prompted from your phone.

Sometimes you may need to install drivers for your smartphone model on your computer.

What's better

The easiest way to connect is to use WI-FI wireless networks - they give the best signal and are the easiest to set up.

Mobile Internet is available everywhere, but connecting to it may cause problems. But access via USB should be used when there is no other choice - for example, there is no WI-FI module, and the selected operator tariff does not include network access services.

Any method of connecting an Android to the network is good in its own way. But, if you suddenly failed to connect, you should not try to use another method, but simply carefully repeat the previous one - most of the errors are associated with inattentive data entry, especially passwords.

Note for ASUS Zenfone 4 (A450CG)

This is the official summary for ASUS Zenfone 4 (A450CG) in Russian, which is suitable for Android 4.4. If you have updated your ASUS phone to a more recent version or rolled back to an earlier one, then you should try other detailed operating instructions that will be presented below. We would also like to suggest that you familiarize yourself with the user’s quick summary in question-answer format.

  • 1. Download annotation for Android 4.4 (tip)
  • 2. View all annotations

Official ASUS website?

You have come to the right place, as all the information from the official ASUS website is collected here, as well as a lot of other useful content.

How to find out the current Android version?

Settings— About phone :: Android version (a few clicks on Fri will launch the Easter egg) [Out of the box, Droid OS version is 4.4].

How to update drivers on ASUS

How to find out the kernel version

You need to go to Options - About phone - Kernel version

How to enable Russian keyboard layout

Go to Settings—Language and input—Select language

How to connect 4g or switch to 2G, 3G

Settings—More—Mobile network—Data transfer

What to do if you turned on child mode and forgot the password

How to enable voice dialing

Go to Settings - Language and keyboard - section (keyboard and input methods) - check the box next to Google voice input

How to disable auto-rotate screen?

Settings—Display :: Auto-rotate screen (uncheck)

How to connect mobile Internet: complete step-by-step instructions

Hi all! Today we have another interesting question - how to set up the Internet on your phone. I’ll say right away that you don’t need to set up the Internet on Android and iPhone (in 95% of cases), and you just need to insert a SIM card into the phone. When the phone and the system itself operate, malfunctions may occur, then to connect to the Internet you need to perform some manipulations, which we will talk about in more detail below.

Here you also need to take into account what exactly the user means by the word “Internet” - mobile Internet or Wi-Fi. Since both of these options are configured differently and have different ways of working. First, make sure that you see the mobile network connection icon on your desktop in the upper right corner. If you see a cross from above, do not be alarmed - this means that the mobile Internet is simply turned off.

NOTE! If there is not a single division of the mobile Internet, then perhaps your SIM card has simply come off - remove it and insert it back again.

Swipe down from the top of the screen to open the Curtain menu. We find the “Mob” icon there. Internet" and activate it. If you have an active Wi-Fi network, deactivate it to check the operation of the mobile Internet.

Now you just turned on the Internet on Android. Check your connection by logging into any browser. If there is no connection, then let's try to configure it in more detail. Another option is that you simply forgot to pay for the service package that is connected to your phone. Remember - to use the Internet, you must have at least some funds on your balance.

Manual network setup and installation

If you turn on the mobile Internet, but it is not there, and you are sure that there is money in your account, then you can check the detailed settings and try to change them. In general, the settings should arrive automatically by air, but there are some glitches. I will show all configurations using the example of smartphones with the Android operating system.

NOTE! With a push-button cell phone, everything is done in the same way, but the menu items may be located in a different place and have a different name.

Next, you just need to look at the parameters that need to be entered manually. If some item is not specified, then leave the field with the default value - blank.

After entering all the settings, you must “Save” the connection. To do this, click on the “three dots” in the upper right corner of the screen. You can also delete this connection by selecting it from the list and clicking “Delete”.

If after all there is still no Internet, then I advise you to read another article on solving this problem - link to instructions.

Let me remind you that Wi-Fi is just a wireless network with the ability to use your home Internet using a router. There is no Internet setup on the phone, and you can only connect to a wireless network. To get inside the settings, you need to go through approximately the same initial steps.

If there is still no Internet on your phone, you can check it on another device. If it is not there either, then there may be two options:

When connecting to WiFi, the Internet can only be configured on the router itself. Therefore, we have all the known instructions on our portal, and you can read them yourself. Just enter the full name of the device in the search bar and find the instructions. You can also always ask our specialists for help in the comments.

NOTE! The full name of the router can be found on the label under the case.

Checking the operation of the hardware Wi-Fi module on a laptop

Review and configuration of the D-Link Dir-320 modem

To understand whether the wireless module is functioning, you need to enter the “Device Manager”.

To do this, use the “Start” button at the bottom left of the screen and type “Device Manager” in the search bar. The link that appears takes you to this section. Look at the network connections folder and look for the line related to the Wi-Fi adapter. If it is available and the driver works normally, then the hardware module is installed and is fully operational.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]