What does it mean the subscriber does not answer? Leave a message after the signal?

Reasons for failure

First, let's figure out what it means - “Number unavailable” on Megafon. The user can hear this notification from the voice informant, which is automatically launched upon an outgoing call.

The message “The Megafon number you dialed is unavailable” can be caused by a number of reasons – let’s look at them all.

One of the main reasons is lack of coverage area

The subscriber is located in a hard-to-reach area where there are not enough base stations - outside the city, on the road or in remote parts of the country, check the coverage area in your city;
Weak signal from the tower - due to the characteristics of the landscape or buildings, bad weather;
When you are in the subway, the signal does not travel underground everywhere;
The user is on an airplane - due to the airplane mode being turned on, it will not be possible to get through.

If the phone cannot register on the network, you will receive a corresponding notification on Megafon that “Subscriber is temporarily unavailable.”

The second reason is that the operator carries out preventive maintenance in order to optimize the quality of service.

Well, thirdly, problems may arise with your interlocutor, perhaps he:

The phone is turned off for personal reasons or due to the battery being completely discharged;
There were problems with the performance of the SIM card - the chip was worn out, the slot was broken.

We hope that now you understand what it means if the Megafon number is unavailable - as you can see, the list of reasons is quite extensive and is associated with various circumstances.

How to resolve the issue and get through to a friend, relative or colleague? Let's try to solve the problem

Why is iPhone always busy?

The “Do Not Disturb” function is enabled on the subscriber’s device

The Do Not Disturb feature makes the iPhone unavailable for calls from any number, but it can be activated and disabled automatically at a specified time (for example, at night), a detailed guide on setting the mode can be found here. When Do Not Disturb mode is active (an icon with a picture of the month appears in the status bar), the iPhone also answers incoming calls with short busy beeps.

Of course, there is always the possibility of missing a really important call, for example, from family and friends. To avoid such situations, you can make an exception for certain subscribers and allow them to dial on an iPhone that is in Do Not Disturb mode. To do this, you need to perform two operations:

1. On the page of the desired subscriber in the Contacts application, click “Add to Favorites”;

2. Go to Settings → Do not disturb → Call Allowance and check the box next to “From favorites”.

Why is it “busy” only on the first call on iPhone?

Another option that, in theory, allows you not to miss an important call in Do Not Disturb mode is called “Repeat calls”; you can enable it in the same menu Settings → Do Not Disturb (see screenshot above). In active mode, the function skips a call to the iPhone if this is the second attempt to call in the last three minutes.

Your number is blocked (blacklisted by the subscriber)

Blocking subscribers using the “Black List” is easy and quick (detailed instructions for working with this function can be found here and here), while the marked contacts from the address book will not be able to reach the user’s iPhone

, immediately after the call,
short busy beeps will sound
. Thus, the “Black List” allows you to solve the problem with specific subscribers, messages and calls from whom you want to completely ignore.

Based on materials from yablyk

Cellular communications are gaining momentum, and few can imagine life without it. However, the hype brings “side effects” in the form of problems with communication and overload of operators. If you are trying to call a friend, acquaintance or family member, but the robot constantly exclaims, this article is for you!

How to solve a problem

The message “Subscriber is busy or temporarily unavailable” Megafon is not a barrier. You will definitely be able to contact the person you are looking for - try to do everything according to our instructions.

Try to call back in a few minutes - perhaps you have encountered a short-term malfunction and everything will work out on its own;
Write an SMS message and send it to the desired mobile phone. You will save yourself from repeatedly dialing the phone, and the user will definitely receive a message after the signal returns. Either the subscriber will call you back on their own, or you will receive a notification that they are available to call again.

Did not work out? Look for other communication channels to see if you can contact the user in a different way, but also be sure to do the following

Be sure to inform the user about the problem - perhaps he did not even know that he had temporarily lost access to the network.

We explained what a common notification means - now you can figure out the reasons for its appearance and how you can solve the problem yourself.

The subscriber's phone is busy due to the blacklist

Another reason for the inability to get through is being added to the “Black List”. The procedure is carried out both in the phone settings and at the mobile operator level. Many operators have this option - Beeline, MTS, Megafon, Tele2, etc.

“Black List” service from the Beeline operator

Have you found yourself in such a situation? There are several options to “bypass” the restrictions:

Try sending a regular SMS, asking the subscriber to remove you from the blacklist. Before doing this, it is recommended to enable SMS delivery notifications.
Just call from another number - if the call goes through like this, you are on the Black List. True, there is a chance to solve everything if a person picks up the phone and wants to talk to you.
Use alternative communication methods - Viber, WhatsApp or Telegram provide audio and video calls.

It is also worth briefly mentioning the Do Not Disturb mode (on an airplane, standalone) - it completely disables the possibility of incoming calls and SMS. There is no way around this option.

Voicemail Megafon

This Megafon service, offered by a cellular operator, refers to a regular answering machine. It is activated when someone calls you. You can determine the necessary parameters yourself by deciding to install an answering machine. The caller will hear: “Megafon number is unavailable, leave a message on the answering machine.”

According to the standard settings, voice mail is activated if:

the subscriber’s cell phone is disconnected (“Leave a message on Megafon’s answering machine, the number is unavailable”);
the subscriber is talking to someone else (you will hear the message “The number is busy, leave a message on Megafon’s answering machine”);
the subscriber is outside the network coverage area.

If you configure the Megafon answering machine, you can make it activate when:

more than thirty seconds of waiting;
any incoming calls (all callers are forwarded to an answering machine).

Any subscribers of the Megafon operator can connect to voice mail. It costs nothing to turn on the answering machine. Every day 1 ruble 70 kopecks is debited from the balance.

How to connect and configure

How to install an answering machine on your own SIM? It's quite easy to connect a megaphone answering machine. To do this, dial *845#. Then call the toll-free number 222. You need to call from the SIM to which you are going to activate the service.

The autoinformer will prompt you to set a personal password to listen to messages, and set a personal greeting for callers. You can just dial *105*602#.

Next, you need to decide on the type of forwarding, that is, set the condition under which the ability to record an answering machine will be activated. It is possible to use the request **forwarding code*+79262000204 (required phone number).

Remember that you must set up redirection. Without it, the service will not work. Among the additional options, the subscriber can use the ability to turn on English for automatic informant messages, use his own verbal signature in the recording, which replaces the phone number.

How to listen to messages

How to listen to an answering machine? Russian allows you to listen to messages left for you by other subscribers using various methods:

Via cell phone. You need to call phone number 222 . The call is absolutely free.
Through the World Wide Web. On the official website of the organization, it is possible to listen to existing messages and, if necessary, make the necessary settings.

How to disable

How to disable answering machine on Megafon? This procedure is not particularly difficult. This can be done in 2 steps:

disabling the answering machine;
disable forwarding.

Dial *845*0# . Anyone who is used to managing their SIM via the Internet can disable Megafon's answering machine in their personal account on the official website.

After turning off the service, you need to remove the redirection. To do this, dial ##forwarding code# . In addition, it can be turned off by going to the cell phone settings.

Subscribers who intend to travel to another city or state may need to deactivate the service. When roaming, you will need to pay for incoming/outgoing calls when call forwarding is activated.

Subscriber Unavailable Leave a Message After the Sound Signal What Does It Mean?

After reading the article carefully, you will find out what this message means when, when you call, you hear “The number is busy, leave a message on the answering machine.” In what cases can you hear this answer and why does it sound. This happens quite often, and therefore there are many opinions on this matter.

In what cases is the answering machine activated (read more...)

The subscriber is currently in the subway, underpass or other places with a weak signal;

The subscriber is outside the network coverage area

No operator can boast of 100% coverage area. There are areas where there is simply no connection. The reasons can be very different - for example, the lack of feasibility of organizing a broadcast zone at a particular point. And when we get into such a zone, the phone cannot register with the /b> network. When any subscriber tries to call us, he will hear a MegaFon voice notification that the number is unavailable.

Let's see in what cases our potential interlocutors will hear a message that our number is unavailable:

When you are on the metro, indeed, coverage from MegaFon is not present at all stations and sections. Therefore, dialing often ends in failure;
When we are at the dacha or on a country vacation outside the city, there may be no connection from Megafon, which is why calling people hear a notification that the called number is unavailable;
If you are at a point with uncertain reception, such points can be located in a variety of places
. For example, in a certain corner of the apartment, around the corner of the house or in the entrance. Literally 3-4 meters to the side - and the connection appears again.

Sometimes a notification that MegaFon's number is unavailable appears when the operator is carrying out any repair or maintenance work - at this time communication services are provided with malfunctions.

The number you dialed is not accessible from your phone.

Modern people are used to being always in touch with other people, so the phone has become an almost indispensable mobile device. When a person makes telephone calls to his interlocutors, he is confident that they will definitely answer him.

Unfortunately, sometimes there are situations in which a person, instead of the voice of his interlocutor, hears a system message from the operator that “the dialed number is not accessible from your phone.” What is this problem, why does it occur and how can it be solved.

The number you dialed is not accessible from your phone.

Bad connection

There is no mobile operator that could provide communications to 100 percent of the coverage area. Indeed, there are places where communication simply cannot be detected, and the user may even hear a message about the subscriber’s unavailability during a call.

The subscriber is not within the network coverage area

As noted above, there is no operator that could provide complete and high-quality network coverage. There are places that communications simply cannot reach. The reason for this could be a variety of factors, including the fact that mobile operators simply did not consider it profitable and appropriate to install networks in certain areas. But, regardless of the reasons, the result is always the same - the inability to register and connect the mobile device to the network.

The subscriber may find himself out of network coverage in the following situations:

The person at the time of making the call or at the time of receiving it was in the subway, where the coverage is not so strong. There are also stations and places in the metro where there are no mobile phone coverage areas at all. The same point applies to underground passages and basements.
In some cases, communication deteriorates outside the city, and this is due to the fact that the concentration of mobile towers there will not be as high. This can also cause the signal to be missing or start to become intermittent.
Communication is not stable on an airplane and, in some cases, on public transport.
Not everyone knows this, but there are points of so-called “uncertain reception”, and these points are located in almost any place - in a store, on the street and even in the house. In this case, a person only needs to take a few steps in either direction. Then the connection can be restored.
There are rooms in which there are specialized screens that block any mobile communications. Such places may include cinemas, theaters and similar places.

All these and other reasons may be due to the fact that a person, instead of the interlocutor’s voice, hears a notification that the dialed number is unavailable.

Negative balance

If the phone balance becomes negative, the operator can block the SIM card. After blocking a SIM card, there may be situations in which a person will not be able to call the other person. And the autoinformer in this case will simply say that the subscriber’s phone is not on the network. And this will happen until the time when the client will be able to independently pay off the debt over the phone and remove the SIM card from the lock.

However, very often a person can call and you can reach him even if there is a zero balance on the phone. Today, many operators provide the opportunity for subscribers to independently make incoming free calls. Also, a person will be able to receive phone calls, but will not be able to make calls on his own.

Faulty SIM card or phone

This does not happen often, but after several years of prolonged, active use, or if a small scratch appears, the SIM card may simply fail. The only thing that can save you in such a situation is replacing the SIM card.

Another similar reason is a faulty mobile device. But in this case, unlike a SIM card, a phone malfunction is much easier to notice. The problem could also be a bad battery, but this is a very rare cause.

Other reasons

The MegaFon auto-informer phrase “Number unavailable” can be heard for many other reasons. For example, when the called party runs out of battery in his mobile phone. That is, the network cannot even determine whether the handset is manually turned off, since it does not give the desired response. The same thing happens when any other subscriber device, such as a tablet or smart video camera, is discharged.

If the called number is not available on MegaFon, this may mean that the subscriber is traveling somewhere. Communication is lost in many suburban areas, causing a message to appear indicating that /b> is unavailable. In addition, most airlines ask you to turn off cell phones and other electronic devices while on board an airplane, so during long flights, a particular subscriber's number may become unavailable.

The subscriber's SIM card has failed - this is another reason why the number on MegaFon may become unavailable. When the SIM card breaks down, the phone loses connection with the base stations. At the same time, the subscriber himself is not notified about this in any way - until he looks at the phone screen, he will not know about it.

Subscriber Unavailable Leave a Message After the Sound Signal What Does It Mean?

Like any electronic device, a mobile phone has a battery to keep the components inside powered. There are also buttons that, by clicking on them, the user can turn it off if necessary.

What is the route of the mobile phone signal? (read more…)

In the era of regular landline phones, everything was clear. The devices process signals and transmit the signal through wires. If there are no problems with the telephone and wires, then such a system has not known any failures.

What to do

If you are trying to call a particular interlocutor, but you hear a notification that the number is unavailable, just try to call him later /b> - that’s the whole solution to the problem. And in order to save yourself from repeated attempts to dial, send him an SMS asking him to call back. As soon as the SMS is delivered (some phones notify you with a sound), you will see it and can call again. In other cases, you will have to wait until the phone of the called subscriber is registered in the MegaFon network.

Now everyone is accustomed to the fact that you can contact a person with a mobile phone at any moment. However, there are situations when communication with the subscriber is lost. Although this service is one of the earliest and appeared at the early stage of mobile communications, not everyone knows about it. Therefore, it is worth knowing what to do when the number is unavailable to MegaFon?

It is worth knowing that there may be several reasons why a subscriber is unavailable. Most often this occurs because the phone is turned off, or if it is out of network coverage. If sometimes a connection appears, then you just need to call the subscriber back later.

And if you need to convey important information

The phrase “The subscriber is currently unable to answer your call”

A network answering machine usually speaks when a subscriber is not online, but his number is connected to a voice answering machine.
As a rule, after this phrase it is said: “After a long beep, you can leave a voice message
,” and a beep is heard. As soon as there is silence, you can speak your message to the answering machine - it will be automatically recorded and saved on the telecom operator’s server.

When your friend turns on his phone, he will receive an SMS from the mobile operator saying that there is a voice message for him that can be listened to by calling such and such a number. This is the most convenient way to convey important information. By calling the answering machine number, he will listen to your message and will definitely contact you.

The number is unavailable MegaFon what does it mean?

A subscriber may be unavailable for several reasons:

it is outside the coverage area of the mobile operator’s network;
his phone or tablet with a SIM card is empty;
disruption of the mobile network due to technical reasons;
the mobile device has become unusable;
the SIM card has become unusable;
if your phone number is blacklisted.

Often the network signal simply disappears or the phone is discharged. Therefore, it is worth trying to call the subscriber several times.

If he doesn’t get in touch for a long time, then it’s worth contacting law enforcement agencies, who will be able to track the location of the subscriber’s SIM card. However, this is possible if the device’s battery is not completely discharged, the phone is not disassembled and is in working order.

Why is iPhone always busy?

The “Do Not Disturb” function is enabled on the subscriber’s device

1. On the page of the desired subscriber in the Contacts application, click “Add to Favorites”;

2. Go to Settings → Do not disturb → Call Allowance and check the box next to “From favorites”.

Why is it “busy” only on the first call on iPhone?

Your number is blocked (blacklisted by the subscriber)

Based on materials from yablyk

The load on mobile operator networks increases every year, resulting in various communication problems. Even now in places with good signal reception it is not always possible to get through. In addition, there are many other factors that can interfere with communication. We will discuss one of these situations further. The subscriber's phone is constantly busy - what does this mean and what are the reasons? We will consider general points that apply to all operators (MTS, Beeline, Tele2, Megafon).

How to contact a subscriber - solutions

Since a subscriber may be unavailable for several reasons, it is worth using several methods to contact him. Consider the following options:

If the subscriber is unavailable, you can try to call him back later. This is due to the fact that a signal from the mobile operator may appear or the phone will be turned on.
Send voice messages. This method is not always effective, because... Voice messages are rarely listened to. So in 60 percent it will be a waste of time and money.
Send SMS. It can contain brief information that will be guaranteed to be delivered. This is a fairly cheap option for communicating with an unavailable subscriber.

A person gets used to good things very quickly and for a long time. Previously, it was somehow quite normal for most people to live without telephones at all, although if they needed to call relatives in the nearest city they had to go to a call center. Now, if you can’t get through to your mobile phone the first time, some people immediately panic when they hear: “The subscriber is temporarily unavailable.” What does it mean? What's happened? Where did you disappear to? Panic may even set in. Let's try to understand this issue.

Some information about the principle of mobile communications

It turns out that the mobility of a modern phone is its weak point. If there is no connection between two conventional devices, then there can be only two reasons: lack of contact between them or a breakdown of one of them. In our case, everything is more complicated. After we dial the number and press the call button, the radio signal goes further - to the switchboard, where it undergoes secondary processing and, together with other calls, is sent to your operator, to the switchboard. Data about all subscribers is stored here and the ability to make a call, location, tariff plan, and so on is determined.

At the next stage, the call goes to a subscriber on the same network or is redirected to another. There he makes almost the same journey. When the person you are calling answers, a connection is established and then the signal follows back. It may seem that the route is too long and problematic, but this is not at all the case. We have before us a very reliable system that processes thousands of calls per second.

Blacklist and Do Not Disturb mode

Modern devices are capable of emulating any action. A properly configured Black List completely excludes unwanted incoming messages and more.

What can be done to bypass it?

Send SMS. Enable receiving a delivery report, and in the text of the message itself, ask the subscriber to remove the number from the list.
Call from someone else's number. If calls do not go through from your phone, but do from another, then there is a high probability of being included in
Use alternative communication channels: Viber, Skype, WhatsApp. You can write a message, make a voice call or video call.

We should also talk about setting up the Black List. Its flexibility depends on the specific model and manufacturer. Many manufacturers include a really large list of features in their products. For example, you can set up groups, allow incoming calls from phone book numbers, block calls from specific subscribers or groups at certain times, and much more. Even the arrival of SMS can be turned off. Smartphones can signal “busy”, “subscriber unavailable”, and the device can also pick up and hang up. And much more.

There are modes in the phone settings. Each of them has its own operating scenarios. In particular, when you select the “Do Not Disturb” option, incoming calls may not go through, giving the caller a “busy” or “subscriber unavailable” message, or they may go through, but without signals.

Often, phone owners do not know about activating these functions, or they are turned on, for example, by children. It is recommended to check the network settings, Black list, actions for groups, settings for specific subscribers and operating modes.

Still, what does it mean: “The subscriber is temporarily unavailable”?

Errors may creep into the designated route. The radio channel between your device and the base station is the most vulnerable point. An indirect indicator of communication quality is the level of reception on your phone. When it is small, the likelihood of error increases. Why and where does it fall?

The signal strength decreases due to obstacles between you and the base station and your distance from it. In some places, the signal may disappear altogether: in elevators, basements, on the first floors, in the depths of large buildings that have metal fittings and thick walls. Drives between metro stations and road tunnels are also not the best places for mobile communications. A failure can also occur from the re-reflection of electromagnetic waves from various radio equipment, base stations and telephones in dense buildings. In this case, operators increase the number of transmitters and use an increased number of transmitters. However, problems with communication are possible. Therefore, when you hear “The subscriber is temporarily unavailable, call back later,” follow the advice - call back later.

What to do when it is impossible to reach the subscriber?

Very often, after assessing the situation, looking carefully around or at the phone display, you can make guesses about the cause of communication problems. It happens that a person wanted to make a call while being far from civilization, but did not look at the fact that there was no signal reception level. Get closer to a populated area and try again. Do not make calls in the subway or other similar places. If you find yourself in heavy rain or thunderstorms, wait until nature calms down. If you see that your mobile phone is frozen, reboot it, and the connection will appear. And the most important rule: if the subscriber is temporarily unavailable, call back later. And let's hope that with the development of technology, many of these problems will disappear.

Technical difficulties

First, let’s give a definition and figure out what “Subscriber is temporarily unavailable” means on Megafon. This voice message appears when a random user makes an outgoing call. It signals that you will not be able to contact your interlocutor at the moment.

Most often, the problem does not depend on people - let’s look at the main parameters of the problem:

Being outside the coverage area. The operator has installed a huge number of towers, but in some places they simply do not exist - remote and small settlements, suburban areas;
Weak base station signal. Sometimes the user may be far from the tower; often the signal is interrupted by bad weather conditions, landscape features and buildings. This problem often occurs in the subway;
The interlocutor has entered airplane mode, which means he is on board the aircraft;
Carrying out technical or preventive maintenance by the operator - sometimes problems can arise due to equipment failure.

What to do if a Megafon subscriber is unavailable, what does this mean? Try to wait a while - most often the connection is restored after a certain period.

Other reasons

Have you heard the voice message “The number you dialed is not available” again? This means that we should not forget about the following possible reasons that cannot be avoided by any subscriber:

The interlocutor forgot to top up his account;
The subscriber turned off the phone for personal reasons or due to low battery;
The Megafon SIM card has broken down - due to expiration date or due to mechanical impact.

You cannot influence such reasons - you just have to wait a little until the functionality of the Megafon number is restored.

Tips and tricks

Even if Megafon’s number is inaccessible, you can take a set of necessary measures! You will definitely be able to contact the right user, just do the following:

Write an SMS message or send a message in instant messenger. In any case, the subscriber will see the notification after turning on the smartphone;
Wait a few minutes - the failure may disappear on its own if the problem lies in technical problems;
Be sure to inform the person about the problems - perhaps he does not know that the number has been left without communication.

We figured out what “Number unavailable” means on Megafon. You will no longer be frightened by an unfamiliar notification - after all, we explained the reasons for the problem and found effective solutions that will be useful to every user.

Sources:

https://megafonme.ru/nomer-nedostupen/
https://megafon-lichnyj-kabinet.ru/avtootvechik-megafon
https://offlink.ru/security/chto-delat-esli-nomer-nedostupen-na-megafon-abonent/
https://4gltee.ru/nomer-nedostupen-na-megafone-chto-znachit/

Reasons for failure

Why is iPhone always busy?

How to solve a problem

The subscriber's phone is busy due to the blacklist

Voicemail Megafon

How to connect and configure

How to listen to messages

How to disable

Subscriber Unavailable Leave a Message After the Sound Signal What Does It Mean?

The subscriber is outside the network coverage area

The number you dialed is not accessible from your phone.

Bad connection

The subscriber is not within the network coverage area

Negative balance

Faulty SIM card or phone

Other reasons

Subscriber Unavailable Leave a Message After the Sound Signal What Does It Mean?

What to do

And if you need to convey important information

The number is unavailable MegaFon what does it mean?

Why is iPhone always busy?

How to contact a subscriber - solutions

Some information about the principle of mobile communications

Blacklist and Do Not Disturb mode

Still, what does it mean: “The subscriber is temporarily unavailable”?

Other causes of problems with mobile communications

What to do when it is impossible to reach the subscriber?

Technical difficulties

Other reasons

Tips and tricks