Most Beeline tariffs provide Internet in packages of several megabytes or gigabytes per month. After the allocated traffic ends, access to the network is blocked or the speed is limited until the start of a new billing period.
But, as a rule, the mobile Internet always ends at the wrong time, and it is not always possible to keep track of the remaining traffic and it may not be possible to extend the Internet speed on your own. To solve this problem there is a special one from Beeline. It allows you not to worry about how much traffic is left and at the same time always remain connected to the Internet.
Under what conditions is it provided?
To enable “Auto-detection”, several packages of different sizes are offered: 70, 100 MB and 5 GB. You can extend your network at any time: at home or while traveling. The function is activated on Beeline tariff plans after the tariff limit has expired, but sometimes it requires a connection. Conditions:
| Description of the offer | Conditions/cost, rub. |
| Traffic 70 MB | 20 |
| 100 MB | 52 |
| 5 GB | 160 |
| Connection/disconnection | for free |
| Speed | up to 73 Mbit/s |
Activation will only occur if the subscriber has money in his account. The option is valid throughout the Russian Federation, with the exception of Crimea, Sevastopol and the Chukotka Autonomous Okrug.
Terms of service
Connecting to the service is free and there is no subscription fee for using auto-renewal of speed, since most of the time it only monitors the availability of traffic. Money is written off at the moment when the Internet ends and the next package is purchased. If, when the traffic is exhausted for its renewal, there is not the required amount on the balance, the additional package will not be connected, and the speed will drop to 64 Kbps.
The coverage area of the additionally provided Internet package is the same as the main one - depending on the tariff plan, it is available either in your home region or throughout Russia. In the Republic of Crimea, as well as some northern regions of Russia, individual tariff conditions apply. This option is not available when roaming abroad.
Internet speed on the Beeline network depends on the coverage area and complies with the following standards: 2G networks with speeds up to 236 Kbps, 3G – up to 21.6 Mbps. and 4G/LTE – up to 73 Mbit/s.
What tariffs are available?
The service is available for prepaid packages, but there are exceptions. Depending on the tariff, the traffic size is distributed. The main tariffs at which you can activate “Auto-renewal”:
| 100 MB | 70 MB | 5 GB |
| "ALL 1-2" "Vseshechka" "Second-by-second" | Archive line “ALL” Tariffs to which the “Highway” option is connected | "ALL 3.4" “All for 1800+roaming” "EVERYTHING" for tablet and computer" |
General information about Beeline
Service from Beeline.
After using up the traffic included in the tariff plan, access to the Internet does not stop. However, pages begin to load at a minimum speed of 64 kbps.
Activating the auto-renewal option helps avoid this. The subscriber can always purchase additional gigabytes. If the service is active, no further actions need to be performed. However, there must be enough money in the account.
How to connect
Once the package volume has been selected, all that remains is to connect. You can do this in several ways:
- Command *115*23#.
- Call 067471778.
- Through the My Beeline application.
- By calling the short number – 0611.
- Through your personal account on the Beeline website.
Only registered users can activate or disable the option through the virtual account. You can get your login and password using your mobile phone number.
Connecting the service
On most Beeline tariffs, connecting to the service is not necessary since it is active by default or turned on when a certain threshold for Internet traffic use is exceeded. The parameters of the connected option - its cost and volume of packages - are determined automatically based on the current tariff plan.
If necessary, Beeline subscribers can independently activate “Auto-speed renewal” in one of the following ways:
- Dial and send the command *115*23# “call”
- Call the short number 067471778
How to disable
To disable Beeline “Auto-renewal”, you can choose one of the following options:
- Command *115*230#.
- Call number 0674717780.
- Online account of the Beeline portal.
- Beeline application.
- Conversation with the operator by phone 8-800-700-06-11.
On the Beeline resource, you can resolve the issue remotely if you find the “Connected Services” section.
It will contain a list of all active offers and you can disable it there. We recommend: Features of connecting the “Parental Control” function
Checking the connection
The easiest way to obtain the information you are interested in is to go to your profile on the operator’s website. Here you can view lists of active options and find out their costs.
A complete list is available in the “Services” section, which becomes available after registration. In the “Finance and details” tab you can get a report on the expenditure of traffic and money. The printout contains information about the packages used and the time they were connected.
To simplify access to important information, install a mobile application compatible with the iOS and Android operating systems. In the “Services” section, select the “Connected” tab. Here is a list of active options. If “Auto Renewal” is not present, the paid feature is inactive.
Conducting a service connection check.
How the service works in roaming
An important detail of auto-renewal of Internet on Beeline is the inability to use international roaming. Tariffs that provide Internet service for use abroad should be found on the official website.
Subscribers located in the Norilsk region receive the first 300 megabytes at the speed provided by the tariff plan. Subsequent data transmission rates will be reduced to 32 kbit/s. You will need to wait 2 days to restore speed.
In the event that the main package of Internet functions functions only in the home area, then additional options will also apply. If the main package of services allows you to use traffic throughout all territories of Russia, then the auxiliary service will operate in the same territory. The exceptions will be the Magadan region, the Republic of Yakutia and the Kamchatka Territory.
What do you need to do to connect?
On all Beeline numbers, the renewal function is basic and no additional activation is required. But sometimes users, without calculating the benefits of this option, disable it, and then our tips will help you enable it.
All services are connected using standard methods:
- Call toll free number 067471778.
- Send a USSD command to the short number *115*23#.
- Register in your personal account and activate the service there.
- Contact the nearest office of the mobile operator Beeline.
- Call the operator for technical support 0611.
Commands for extending traffic
Description of the service Automatic speed renewal
Almost every subscriber has an Internet package included in their tariff plan. And it has its limitations. Some people have 1 GB per month, others 2 GB, etc. So, for example, if the remaining traffic is exhausted, the Beeline speed auto-renewal service prolongs the validity of the traffic for a certain amount of high-speed Internet for an additional fee. For 2021, for users of Moscow and the Moscow region, the prices are as follows:
Costs in other cities and regions of the country may differ from the above amounts. Check with your telecom operator how much this or that volume of traffic will cost in your locality. “Auto-renewal” itself is a free service. You only pay the cost of additional Internet traffic. But, unfortunately, not all Beeline subscribers can use it.
Automatic speed renewal and tariffs
But don’t be upset, because subscribers with the “Highway” option connected also have the opportunity to take advantage of this offer. If you have a tariff plan that you are not entirely satisfied with in terms of content, you may want to think about changing the tariff plan and switching to a new one that is more suitable for your needs. It’s not for nothing that in the beginning it was a fairly popular service. Agree, many people don’t want to suddenly be left without the Internet at the most necessary moment. And this is usually how it happens! There is one more good news - even if your balance is in the negative, the Internet will still be available, only at a low speed. But in any case, it's better than nothing at all.
Connecting to auto speed renewal service
If you want to know a lot more about this option and many others, then you can safely call the operator at 0611 and ask your question. Perhaps it will be even more convenient for you - not to understand the intricacies of the connection, but simply verbally ask a company employee about it. And he will do everything for you - this is the Beeline service, and this is its huge advantage.
But if you still have a question about auto-renewal of Beeline speed and how to activate the service yourself, then there are several options on how to do this:
The Internet is needed always and everywhere. It is better to take care of its extension in advance. Otherwise, you will simply waste precious time.
Epilogue
Based on all the information given above, we can conclude that each Beeline subscriber has a choice - to connect or not connect to the service.
But after studying the tariffs, you can come to the conclusion that this service is useful in every sense:
- You only need to pay when activating additional packages.
- The Internet is available to the user at any time and there is no fear that the necessary and important information will not reach its recipient on time.
- It is always possible to enable or disable the speed extension function.
So be sure to activate it and be online always.
Useful video:
What is auto renewal?
The option is an opportunity to purchase the required number of megabytes for a certain amount after your monthly traffic limit has expired.
It is automatically connected to all new numbers, which is why some users consider it “imposed” and refuse it, but over time they are convinced of its feasibility and connect again.
Description in Beeline
If you exhaust the basic Internet package, your network access will not be suspended, but you will be transferred to a very low connection speed (up to 64 kbps). To prevent this from happening, connect “Auto speed renewal” from Beeline, then you can purchase an additional traffic package at any time. There is no need to do this manually, the purchase will be made automatically, the main thing is that there are enough funds in the account.
Using a mobile application
The My Beeline application allows you to work with functions in your personal account from your smartphone. How to disable Beeline “Auto-renewal speed” on your phone:
- Open the application and log in (if necessary).
- Press the three bars (menu button) and go to the “Services” section.
- Disable the slider next to the unnecessary function.
- If there is no option in the “Connected” section, then it is deactivated and is located in “All services”.
