How to set up Internet on an MTS Belarus phone: automatically and manually

Typical settings

To configure your phone, you must enter the following parameters in the phone menu:

• Profile name: mts-internet
• Data channel/Data bearer: GPRS
• Access Point/APN: mts
• User name: mts
• Password: mts

Open in the “Settings” menu - “Wireless networks” or “More.” “, or “Advanced” - “Mobile network” or “Mobile networks”, or something similar - “Access point” or “Access points”, or “APN”.

After you have entered “Access Points”, press the soft/touch key in the form of a “square” on your phone, click “Create” or “New Access Point”.

• Name: mts
• APN: mts
• Proxy: not installed
• Port: not installed
• Username: mts
• Password: mts
• MCC (where not automatically entered): 257
• MNC (where not entered automatically): 02
• Authentication type: PAP
• APN type: select “Internet” (where there is no automatic selection - write default)

Press the soft/touch square key on your phone and select “Save”.

Check the created access point.

1. Reboot phone
2. Check that the “Data transfer” checkbox is checked
3. Check availability (connection *111*401#)
4. Check balance (must be positive)
5. Check settings.

If it doesn’t work, contact the nearest MTS communication store for help from a customer service specialist.

1. Go to the “Settings” menu

2. Select "General"

3. Select "Network"

4. Select Cellular Data Network

5. Enter the following information

6. To access the Internet, select the Safari icon on the main screen

1. Go to the “Settings” menu:

3. Select Cellular Data Network:

4. Enter the following information:

5. To access the Internet, select the Safari icon on the main screen:

Before you start setting up your smartphone, check if your number has been added. You can check its presence and, if it is missing, connect it in the Internet Assistant.

1. Open Menu -> Settings -> Access Point.

2. Click “Add” (in the lower left corner or the “+” button at the bottom).

3. Enter the connection name: mts

In the next menu “Internet APN” enter the parameters:

• Access point name: mts
  or
  mts-internet
• Username: mts
• Password: mts
• Proxy address: Leave blank
• Proxy port: Leave empty
• Network type: IPv4
• Authentication type: none
  or
  PAP

Read also:  How to pay for a Rostelecom home phone without queues and commissions

Click the checkbox to save the access point. Next, long press to select the created access point, select “Activate” from the menu and reboot your smartphone.

APN settings mts Belarus android

Menu – Settings – (Advanced, More or Wireless networks, Other Networks) – Mobile networks – Access points – New access point:

Name: MTS BY APN: mts Proxy: not configurable Port: not configurable Username: mts Password: mts Server: not configurable MMSC: not configurable MMS Proxy: not configurable MMS Port: not configurable MCC: 257 MNC: 02 Authentication type: PAP APN Type: default APN Protocol: IPv4

source

MTS Belarus Internet settings: automatic and manual

How to set up MTS Belarus Internet on your phone if you don’t want to go to a communication store or specialized workshops? Usually, solving the problem is not difficult, since the process of setting up a mobile phone is extremely simple and does not require specific knowledge or skills. Users just need to follow the instructions below (depending on the software used) and prepare the MTS contact center phone number in advance. It will be needed in case of difficulties. Additionally, you should make sure that you have money on your SIM card balance and that your device supports modern communication networks, including 3G.

Automatic Internet settings MTS Belarus

The easiest way to access the mobile Internet is to get automatic settings. For this you will need:

1. call 0870221;
2. follow instructions.

As a result, the subscriber will receive the necessary parameters for cellular communication and will be able to use the Internet. If this does not happen, you will have to proceed to manual configuration and enter standard network parameters into the phone yourself. Users will have to fill out several fields, indicating the data provided by the provider (presented on the company’s official portal).

Automatic phone settings

All MTS subscribers, when purchasing a new phone, can use the Internet, send or receive SMS and MMS without setting up their phone.

If you are unable to access the Internet or send MMS, order automatic settings:

If you do not receive the settings or cannot apply them, you need to configure the phone manually.

Access without settings

• Don't know how to set up Internet or MMS on your phone?
• Is it still necessary to use them?

Get full access to the Internet and the ability to send or receive MMS messages even if your mobile phone settings are incorrect with .

Since April 9, 2010, it has been added automatically and free of charge to subscribers of all tariff plans (except for “Cool” and “NIKA (corporate)”) with the Mobile Internet service activated.

You can connect and disconnect yourself:

• typing the command *111*2156#
• using your Personal Account
• in the “My MTS” application

How to manually set up the Internet on an MTS Belarus phone?

To connect the network manually, users will have to enter standard MTS Belarus Internet settings:

• Profile – mts-internet;
• Data bearer – GPRS;
• APN – MTS;
• User Name – MTS;
• Password – MTS.

That is, almost all items are filled out the same way. It is important to take into account that, depending on the operating system and model of the smartphone (tablet), minor differences in the proposed setup process are possible. They are associated with different approaches of manufacturers to the interface and menu of phones. Moreover, the difference is so insignificant that it will not be difficult to understand the features of preparing the device for operation.

Android

To set up MTS Belarus on Android, you will need to open the settings section and select the item that mentions wireless networks. If there is no such section, you should go to the “advanced” menu and find the “access point” item. Usually in Android smartphones it is located in the “mobile Internet” tab. After that, all that remains is to open the mentioned section and create a new point, specifying the following parameters:

• all names, APNs and passwords are MTS;
• proxy and port are not set;
• MCC and MNC – 257 and 02, respectively (if automatic parameters are not specified);
• authentication type – PAP;
• APN type – select “Internet” in the drop-down list or manually specify default.

How to set up Internet MTS on a router

To configure network settings on your router, first you need to connect it to your computer. A special program is always supplied with the device, with the help of which settings are made easily and simply. We are talking about the MTS Connect Manager software. Through this program, the user will be able to control the device, change parameters, and, if necessary, reset or restore them. You need to launch the software and find the “Setting up an Internet connection via Wi-Fi” section. Here we add a new connection point. The necessary parameters for setting up a new access point can be found in the technical documentation of the router. Most often, these parameters will coincide with telephone ones, where the same APN point and the same login and “mts” pin are set. Detailed instructions for setting up Internet access configuration on the router can be found on the company’s official website. The necessary information is also presented in the user’s personal account. The necessary data will allow you to configure the Internet both manually and automatically.

How to set up mobile internet MTS Belarus?

Mobile Internet, unlike MMS, is becoming increasingly popular. It allows:

1. Free access to the World Wide Web.
2. View various information.
3. Communicate with friends on social networks and instant messengers.
4. Use various applications.

At the moment, 3G is available in Belarus. This technology provides optimal data transfer speeds for accessing the network and viewing various web pages.

But before using the mobile Internet, you need to configure it. You must enter the appropriate parameters to gain access to the Internet. You will need:

• A device that supports data transfer over mobile networks.
• You can also take the parameters from the operator, or enter them manually.

How to connect mobile Internet to MTS?

There are several ways:

1. via the MTS website, support tab, enter your phone number, answer the question and you will receive an SMS with settings

2. using the key combination *111*18#*call key

3. Send a message to service number 111 with code 2122

Read more here:

How to activate “Option on the network” on MTS?

You can activate the “On the MTS network” option in several ways:

Send a request *345#

Log in to your personal account on your PC or the application on your smartphone. In the “Services” section, find the desired option and activate it.

Call the support service or personally visit the MTS sales office.

However, remember that there are a number of restrictions and conditions for use. You will find a detailed description of the “On the MTS network” option, connection conditions and activation methods in this article.

What is the most profitable MTS tariff for Internet on a phone?

MTS, in principle, does not have particularly cheap tariffs. If you need an emphasis on the Internet, then the Tariffishe tariff looks like the most optimal. Absolutely unlimited Internet without traffic limitation + 500 minutes + 500 SMS for 650 rubles per month.

Automatic Internet settings MTS Belarus

MTS Belarus Internet settings are of two types:

1. Automatic. You request settings and save them on your device.
2. Manual. The user enters all parameters independently.

Most devices support automatic settings. But if they are not saved on your device, you will have to enter all the parameters manually. This procedure is not that complicated and will not take much time.

Typically, automatic parameters are received when the gadget is initially launched. The system will prompt you to save them, confirm the action and reboot the device. If the data has not been received, you can request it in one of the available ways:

• By USSD command – *303#.
• Call 303.
• Send an SMS to 303.
• Log in to your personal account and leave a request there.

Auto-tuning

Automatic Internet setup allows the subscriber to save personal time. This is the simplest and most accessible way. In this case, you will not need specific knowledge and skills.

To get the settings you need, you can do one of the following:

• Call toll-free number 0876.
• Sending a message to number 1234.
• Log in to your personal account through the official MTS website.

To request Internet configuration settings, you need to go to your personal account on the MTS page, open the “Support” item, then select “Phone Settings”, and then follow the instructions. A more common method among users is a blank SMS to a short number. Any of the above methods will allow you to send a request to the company. Immediately after sending the request, the system will quickly process it and will be able to send the necessary settings to your number in the form of a short text message. They will need to be saved, after which you will immediately gain access to the network. Sending a message and saving Internet settings are free services. Then the subscriber will be charged mobile traffic according to the activated tariff. Payment for the service will be made exclusively for the gigabyte package or the actual traffic consumed. It all depends on the terms of your tariff plan. Experts recommend that users reboot their device immediately after receiving the message with the settings and saving them. This will make it possible to quickly activate changes on your smartphone.

How to manually set up the Internet on an MTS Belarus phone?

Manual configuration will be required in cases where it is impossible to save automatic settings. The procedure largely depends on the device you are using and its OS.

For example, on a cell phone without an OS you will need to enter:

1. Account name – mts-internet.
2. Enter MTS in the APN field.
3. Data standard – GPRS.
4. MTS – the value acts in terms of password and login.

How to set up MTS Internet on Android

On mobile phones with Android OS you will need:

• Find it among the items in the Wireless networks settings.
• Open a section with other parameters.
• In it, find a column where you can specify an access point.
• Enter mts in the APN column.
• Proxy, we don’t touch the port.
• MTS – the value acts in terms of password and login.

How to set up MTS Internet on iPhone (iOS)

iOS devices are quite common these days. The scheme for setting them up for using the World Wide Web is similar:

• Open the settings section.
• Find a mobile phone point.
• Select data transfer.
• Where you need to enter the APN, indicate MTS.
• MTS – the value acts in terms of password and login.

How to set up MTS Internet on Windows Phone

Windows Phone OS devices are not very popular. Now it is quite difficult to find these devices among subscribers in Belarus. But how to prepare the device for access to the Internet?

1. Click on the settings section.
2. Select Access Point.
3. Create a new entry by clicking on the plus sign.
4. In the Access Point window, specify mts.
5. Username and password – mts.
6. Enter the network type – IPv4.
7. Connection type – PAP.

What is an access point

An access point is a path that connects a mobile device and the World Wide Web. It allows you not only to access the Internet, but the phone itself can serve as a source of wireless communication for other devices if all the settings are correctly configured on the phone. Several of them can be connected at once.

One of the main parameters of the mobile Internet is the access point name APN (Access Point Name). Usually it contains the name of the cellular network operator, and the word internet is written before it. It is different for each provider, so the specified settings in the device must correspond to the current SIM card. Internet distribution is via Wi-Fi. Other connection methods are also possible. In order for the process to work, you need to configure your phone:

1. Let's go to settings.
2. Wireless networks – Wi-Fi access point. By default it is disabled. You need to switch the button to active mode. The connection process will begin and after a few seconds the device is ready to share the Internet with others.
3. This section contains the “Settings” item. In order for other devices to connect freely, you need to set “Without protection” in the security option. Otherwise, you should come up with a password so that only people who know it can connect.

Other phones connect via Wi-Fi. To do this, open a list of available connections, select the desired APN, enter a password if necessary, and press the connect button.

To connect other phones via Bluetooth or USB, tethering mode is enabled. To do this, you need to activate the corresponding buttons - they are located in the “Networks and Internet”, “Modems”, or “Additional functions” settings.

Setting up an access point

You learned how to set up MTS Belarus Internet on Android and other operating systems. When you enter all the settings, do not forget to save, then reboot the device. In terms of checking, try going to any website. If the network is stable, then you did everything right.

If you have problems with the connection, you should check your settings. It is possible that you made a mistake when entering them. If you cannot find the cause of the failure, you should contact the operator and request help from specialists.

To access the World Wide Web, we recommend connecting to a tariff plan with a traffic package or using additional services of the company. Then you will not overpay and will be able to save money.

source