It is now impossible to imagine a person’s life without a mobile phone. These gadgets are no longer used only for negotiations. They allow you to send and receive text messages, use the Internet to communicate on social networks, and quickly receive any information.
But almost any device has one, but very significant drawback - the more often we use it, the faster the battery runs out. This usually happens at the wrong moment. And then it turns out that, according to the law of the genre, the charger was left at home, and there was nowhere nearby to recharge the device. We'll tell you how to charge your phone without charging and reconnect with the world.
Recharging using the “frog”
Only owners of smartphones with a removable battery can use this method. You need to remove the battery from the phone and then place it in a universal frog charger. In this case, you need to make sure that the polarities (plus and minus) on the battery and the terminals of the device are opposite. After the “frog” is connected to the outlet, the charging process will begin.
Charging with AA batteries
You can also replenish the battery on your smartphone using a charger that runs on AA batteries. As with previous types of devices, a USB adapter is required here. The disadvantage of this method is the need to constantly buy new batteries, but in case of urgent need, they can be borrowed from the TV remote control, flashlight or alarm clock.
More about capacity
Capacity is a characteristic that indicates how long a portable battery can be used to power other gadgets without recharging. Most portable devices have an indicator that flashes when they are running low. To use the PowerBank again, you need to charge it in one of the ways - from the network, laptop or computer. Charging occurs through a special micro-USB connector on the case.
We advise you to study the 12 volt motion sensor
Most popular batteries have a capacity in the range of 1500-20000 mAh. What capacity is needed depends on the devices that the PowerBank will be used to power. If you need a battery to charge your phone, a device with a smaller capacity is suitable than for charging a laptop or photography equipment.
The weight of a portable battery directly depends on the capacity. You should know this to avoid buying a fake. On the Internet you can find offers in which the low weight and low price of the battery do not correspond to its capacity. An increase in capacity by 5000 mAh makes the model weigh about 100 g more.
Application of Dynamo
Another useful device for replenishing your smartphone battery when away from a power outlet is a dynamo. Unlike solar panels, this device does not require cloudless skies to operate effectively. The dynamo converts mechanical energy into electricity - only after the user twists a special handle for several minutes. Thus, it is quite possible to charge the battery by a couple of percent in case of urgent need.
How to charge your phone while hiking
Phones have become an integral part of our lives: even when going on a trip or a hike, we will definitely take our gadget with us. True, we don’t always worry about what will happen if the battery runs out. Well, there are ways to charge your phone without charging in the forest, fields, or simply far from civilization. Some imply that the traveler takes additional devices with him, while others are aimed at using everything that is at hand.
If you take a couple of solar panels with you on a hike, then you won’t be left without communication.
Solar Charger
Civilized methods of charging phones
First, we'll look at more traditional and simpler charging methods using modern technology.
How to charge your phone using an external battery
Power banks are portable batteries that usually have a much larger charge capacity than mobile phones. With their help, you can easily charge a completely dead gadget several times.
Modern power banks allow you to “carry” about 10,000 mAh with you
Naturally, provided that the external battery itself was pre-charged. The charging process is simple. Simply connect two devices using a USB cable
Powerbank up to 3000 rubles
How to charge your phone using a solar battery
Naturally, the chances of finding a charger based on solar energy on a hike or putting it together out of nothing are close to zero. Therefore, it is better to take such a gadget with you.
If you travel frequently, it makes sense to get a solar charger.
It is completely autonomous, easy to use and does not take up much space. The principle of receiving a charge is very simple: we install the solar panel at the optimal angle to receive the maximum amount of solar radiation, connect the smartphone to our installation and wait.
How to charge your phone without electricity using traditional methods
Next, we will look at less technologically advanced and even extreme ways to charge a smartphone battery. They should be used only as a last resort, if there are no other options left.
Charge your phone battery using tape
Any battery on any smartphone always has more than two contacts. Most often there are three of them.
Two are directly responsible for transmitting current, and one, the middle one, is for transmitting data about the state of the battery. Typically, the phone does not turn off when the battery is completely dead, but when it has between 5 and 20% charge left. And if you seal the middle contact with tape or any other similar material, you can buy the gadget a few seconds or even minutes to make one or two calls. Naturally, charging your phone using tape for tasks such as Wi-Fi or geolocation is unlikely to work.
Lemon, nails, copper cord
Now you can move on to more extreme charging methods, the use of which is associated with risks to both the battery and human health.
To implement this idea you will need a lot of lemons. The more of them there are, the more you can charge the battery. You need to stick a nail into each fruit, connecting them together with copper wire. Its free ends must be connected to the previously removed battery of the device. This will allow you to replenish your stock by a few percent, which is sometimes very important.
Sometimes you can charge your phone this way:
Direct connection to power supply
The following procedure can only be carried out with rubber gloves. First, you need to strip the end of the old charger with a knife to expose the two wires (red for positive, blue for negative). Next, you need to move them slightly apart and connect them to the opposite contacts of the smartphone battery. Having secured the device with electrical tape, it must be connected to a power source.
There are quite a few ways to return a couple of percent of charge to the battery. Of course, it is recommended to use the last three of the above methods only at your own peril and risk, since you can cause irreparable damage to the phone and battery. We recommend that you take care of this problem in advance.
( 8 ratings, average: 3.88 out of 5)
How to charge your phone without the original charger at home
Charging your gadget at home is much easier than finding yourself somewhere in the fields without any devices or charging adapters. If you look around a little, you can find means with which we can easily charge our smartphone.
How to charge your phone battery without charging using a USB cable
As a rule, most modern chargers are a simple USB cable. This is something you can use in a pinch if you need to charge your phone.
Any computer, laptop or more or less new TV has a USB port on board, with which you can connect your smartphone to the device, thereby charging it. This is the most affordable and obvious way to charge a phone battery without charging, since the average house or apartment is abundantly saturated with various electronics.
USB cable for phone
How to charge your phone if the socket is broken using a wireless charger
There can be two options here: when the charging connector on the phone is broken and when it is intact. In the first case, you can use universal wireless chargers, consisting of two parts - a transmitter and a receiver. The receiver is connected to the smartphone connector, and the transmitter is connected to the power supply. Such chargers are inexpensive and can be found more and more often on the market and in electronics stores.
Wireless charging has become increasingly common even in the simplest smartphone models
If your phone's connector is broken, then you can only hope that it can charge wirelessly. Here is a small list of devices that support this functionality out of the box:
- iPhone 8;
- iPhone X;
- Samsung Galaxy S8, S9;
- Xiaomi Mi Mix 2S;
- LG V30+;
- Sony Xperia XZ3;
- Doogee S60.
The list is not so wide, but it is constantly being updated with new devices. If your phone is among those listed, then you will not be left without a charge in the battery of your electronic friend.
Wireless phone charger
How to charge a phone battery without a phone using a power supply (“frog”)
The simplest “frog” looks like a small power supply. In fact, that's what she is. On one side of the device there is a plug for the socket, and on the other there is a special clip for connecting the “frog” contacts exactly to the battery contacts. Overall, a convenient and versatile item.
A typical frog charger is a universal device
Its only inconvenience is that you need to remove the battery from the phone, and this option is not present on all modern gadgets. But you can charge the battery without a phone and without factory charging with its help, since it absolutely does not depend on either the manufacturer of the gadget or the model.
The charging process itself is quite simple. The “frog” clamp can change the distance between the contacts, which represent the “+” and “-” terminals. The battery must be removed from the phone and the tongues of the “frog” contacts should be positioned at the same distance as they are located on the battery, and in accordance with the polarity markings. Then you need to clamp the battery with a clamp and connect the finished structure of the frog and the battery to the mains.
You can install almost any battery
The charger usually has at least one indicator, usually green. If it lights up after connecting to the network, it means charging has started. If not, you should check the polarity and tightness of the contacts. This is a fairly simple and affordable way to charge your phone wirelessly.
How to charge your phone directly with bare wires from an old charger
A bit of an extreme method, but if you have nothing at hand at all, then this will be a good last alternative. It’s worth talking a little about determining polarity by wire colors. More or less significant manufacturers adhere to accepted standards and mark the wires as expected: “+” - red, “-” - blue. But since there are also cheaper analogues on the market, which are assembled in basements in China by people who have not heard anything about the color coding of wires, you can find all the colors of the rainbow in cheap charging.
Don't throw away your old chargers, they can still serve you well
In general, with enough luck, such a device may have markings on the board itself, in the places where the wires exit. In this case, you will have to navigate this way.
After determining the plus and minus, you need to connect the output wires directly to the battery. You can secure them in place using any available means - electrical tape, tape and even simple clothespins. It is worth noting that you need to charge the battery in this way literally to the charge level for making two or three calls, since control over the charge level is minimal here.
Is it possible to charge a phone through the headphone jack?
It is probably impossible to find the authors of this urban legend anymore. But to understand for yourself that charging your phone through headphones is impossible, you just need to look at the circuit diagram of any smartphone.
The contacts on the headphone plug serve only to transmit sound signals
Even for a person who is not particularly versed in electronics, 20 minutes will be enough to figure out that the headphone jack has nothing to do with either the battery controllers or the battery itself.
